User Manual

Setting / Control
1.Power On / Off
2.Brightness Control
4. Color Temperature Control
(LM400-3K5K only)
3.Channel Setting
Push the power switch to“ON”to
turn on the LED light. Check if the
information is displayed properly.
Push the power switch to “OFF”
to turn off the LED light.
Turn the brightness dial side to side
to adjust the brightness.
The brightness range is from 0~30
and the current level is displayed on
LCD. Turning the dial to the right
increases brightness. Turning the dial
to the left decreases brightness.
When brightness value is zero,
LED lights become off.
Turn the Color Temperature dial side to
side to adjust the Color Temperature.
The color temperature range is from
3000º K ~ 5400º K and the current
level is displayed on Color temperature
LCD on LM400-3K5K.
You can adjust the brightness of the
LED Light by using a wireless controller.
(optional product.) Press the Mode
button to see the currently set channel.
This will be shown blinking. To change
channels, hold down the mode button
and turn the Brightness dimmer.
5
3K 5K
2.4.
1.
3.