User Manual

Cineroid LM200
English
Cineroid LM200 Cineroid LM200
ON CAMERA LED LIGHT
Installing the Battery
06 07
Powering On/O
1. Attach the battery mount to the back of the body with the use of the two screws on the mount.
2. Connect the cable on the battery mount to the body.
3. Attach the battery to the battery mount.
4. Be sure to charge fully the battery before installing.
5. Sony NPF Type battery is compatible.
1. Push the power switch “ON” to turn on the LED light.
2. Check if the information is displayed properly.
3. Push the power switch "OFF” to turn o the LED light.
31 2