User`s manual

English
ELECTRONIC VIEW FINDER
Cineroid EVF4RVW
10 11
Before Using the EVF
Connecting input / output
Install the battery or connect external power and Turn the power
switch to the ON position. If you have an external input, you will
see the image displayed from that signal. If there is no external
input, you will see the default screen.
Power On / O
Power ON/OFF switch
2 Serial Digital Inputs the EVF4RVW module has HD-SDI
switchable 3G-SDi input connectors for monitoring.
Connect input then select the type of input in menu.
Input : HDMI
Input : HD-SDI
Output : HD-SDI
Control1 Control2 Setting1 Setting2 System Exit
F1-Back / Exit Input Source Set
Input Select
Parameter Save
Parameter Restore
Firmware
Exit
HDMI
HDSDI
Test Pattern
Menu : System - Input Select
Select the type of Input
*How to operate the menu, refer to page 12.