User manual

KineRAW-S35
- user manual -
8.2 Firmware update
Information on the employed firmware version can be found below the last point of the
CONFIGURATIONS MENU.
a) Download a firmware to an USB stick.
b) Put this USB stick into the A- USB Pol of the camera.
c) Enter the CONFIGURATIONS MENU and choose “SYSTEM>FIRMWARE
UPDATE>CONFIRMATION”, wait a few minutes until the displays shows a confirmation and,
after, reboot the system.
8.3 Upload customized LUTs
1. Insert an USB stick with your LUT files
2. Enter the CONFIGURATIONS MENU and choose “SYSTEM > LUT > LOAD CUSTOMIZED
LUT” and confirm.
3. Wait until the displays indicates “LUT file(s) loaded successfully”.
4. Restart the camera
PLEASE NOTE
The USB Stick needs to be FAT or FAT32 formatted to be recognized by the camera
8.4 Core temperature and system
The last point of the CONFIGURATIONS MENU provides information of the operation temperature
inside the housing. The critical point is at 85 °C. Please shut down the camera immediately as soon
as the temperature exceeds 85 °C.
WWW.KINEFINITY.TV
31