User manual

KineRAW-S35

- user manual -

• Playback with LUT in WINDOWS

By default your Cineform footage will be played back without a LUT applied. Using the Cineform

decoder any LUT can be selected quickly:

1. Double-click on the LUT file (*.cube or *.look) to select an LUT (or use the LookInstallerApp)

2. Right-click on the Cineform decoder icon (red “C” in your windows system bar) and choose

“Active Metadata” / “Looks (3D-LUTs)”

3. To disable the LUT, deselect “Looks (3D-LUTs)” again

• Improve Cineform debayering results in WINDOWS

By default the de-bayering algorithm is set to “auto”. If the footage has been recorded in good

lightning conditions, you can increase the image quality by choosing “Advanced Details3”. However,

this process requires more hardware resources. To change the de-bayering algorithm:

6) Right-click on the Cineform decoder icon (red “C” in your windows system bar)

7) Choose “Decoder Settings” and after “Decoder Type”