User manual

INTRODUCING: KINERAW-S35

The KineRAW S35 digital cinema camera is a RAW digital cinema camera with a Super 35mm

sensor. This camera has been designed and developed by Beijing Zhuoyi Technology Co., Ltd. with

all intellectual property rights.

Key features

• Super 35mm CMOS sensor; Recording format DCI 2K or full HD;

• Dual RAW recording: uncompressed CinemaDNG or GoPro Cineform(tm) RAW; simultaneous

recording on 2.5” SSDs enabled;

• Interchangeable lens-mount system;

• Video output 1080p/720p using HDMI and 3G-SDI, compatible with all standardized broadcast

monitoring devices

• Supports 3D-LUT and LOOK files for color management.

Safety instructions

• Please read all points of the user manual carefully and pay attention to all warnings and notifications;

• Don't use the camera near water; avoid contact with any liquids;

• Use dustless dry cloth to clean the camera body;

• Don't cover the vent to avoid over-heating of the camera;

• Don't film directly into the sun;

• The recommended environmental temperature for using the KineRAW S35 is 0-40 degree Celsius;

• Don't use the camera in dusty or humid conditions or during a thunderstorm.

• Attention: the original KineMount is identical with a PL mount. However, for adaptability

reasons it is built very close to the sensor. Do not attempt to mount a lens directly onto the

KineMount. This will cause serious sensor damage. Always attach an adapter first.

• Always press the F3 button before ejecting a SSD card before removing. On the camera display the

corresponding slot will be labeled with “vacancy” when the SSD is ready for removal.

• The logo on the SSD must be on the upper side. Otherwise you will run danger to damage the pol.

• Please don't boot the camera with an USB stick inserted. The system will reset and you'll loose your

customized setting and files.