User manual

KineRAW-S35

- user manual -

3.4 Shooting parameters

In LIVE VIEW mode you can use the buttons on the left side to set various shooting parameters.

Image 6: Shortcuts and the selection wheel

Press the SHORTCUT BUTTONS on the left side of the camera and the respective options will

appear on the display. Turn the SELECTION WHEEL to toggle through the options. Press the

selection wheel to confirm your choice.

1) SHUTTER: You can either set the shutter speed or the shutter angle in this menu. The default setting

is 1/50s and 180 degree for 25fps. Which parameter you can change depends on your settings in

LIVE VIEW > EXPOSURE.

2) FPS: Set the desired frame rate. Depending on the recording resolution different frame rates will be

available.

3) ISO: Change the ISO setting – considering your current LOOK and color temperature settings.

4) TEMP: Set the color temperature from 2000K to 7000K in 50K steps. You may also customize your

white balance.

5) LOOK: Choose a look up table. In our default setting the user can choose between: KineLOG,

Kine709 and KineCOLOR.

a) KineLOG equals a LOG C algorithm. When choosing KineLOG you'll see the widest

movement range on the display. However, the video output of the KineRAW S35 is 8bit.

Thus, it is impossible to display a 12 bit movement range.

b) KineCOLOR maintains more highlight and shadow details compared to KINE 709. It can be

used directly as a starting point for your color matching during post production.

c) Kine709 corresponds with REC 709 and, thus, coincides with ITU broadcasting standards.

The color range of REC709 fits the output range of any HDTV.

PLEASE NOTE: When recording in CineformRAW. LOG C will always be employed, regardless of your

LOOK settings.