User manual

15.0 MISCELLANEOUS
46 R599820 - Blackwing mk2013 User Manual
Examples
Available Reference and Response commands
A reference command ask the projector about its status.
Examples
15.2 LAN protocol
LAN / RJ-45 communication specification
To set the projector to LAN Control Mode, go to the Function menu, then set the Communication Terminal from RS-
232C (default) to LAN.
The network settings may have to be modified in the projector’s network menu to match your current LAN network.
• DHCP Client: When set to ON, the projector’s IP address will be automatically set by the DHCP server. on the
LAN.
• IP Address: Sets the IP (Internet Protocol) address of the projector. A valid address must be set for this unit.
• Subnet Mask: Sets the Subnet Mask
• Default Gateway: Sets the Default IP Gateway of the projector.
•MAC Address: A 6 byte hex number that uniquely identifies the projector on the LAN. The value is unique to
each individual unit on the LAN network.
The first step to verify that the network configuration of this unit has been correctly set is to ping the projector from a
computer on the network using the command prompt.
Sending a LAN Control Command
In order to send a Remote Control compatible command to this unit, you must open a TCP connection on port
20554. and send a command immediately as the connection will be dropped within 5 sec of inactivity. If for any
reason you have to change the TCP connection port, you may use the following RS-232c/LAN command.
You want to... Command to send
Switch the projector ON
send: 21h 89h 01h 50h 57h 31h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah
Switch the projector OFF
send: 21h 89h 01h 50h 57h 30h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah
Change Active Input to Comp.
send: 21h 89h 01h 49h 50h 32h 0Ah
or
send: 21h 89h 01h 52h 43h 37h 33h 34h 44h 0Ah
Display On Screen Menu
send: 21h 89h 01h 52h 43h 37h 33h 32h 45h 0Ah
receive: 06h 89h 01h 52h 43h 0Ah
Change Lens Memory1 name to
“TV-size” (unused characters are
filled with space = 20h)
send: 21h 89h 01h 49h 4Ch 4Dh 31h 0Ah
receive: 06h 89h 01h 49h 4Ch 4Dh 31h 0A
send: 54h 56h 2Dh 73h 69h 7Ah 65h 20h 20h 20h
receive: 06h 89h 01h 49h 4Ch 4Dh 31h 0A
Header Command Description Response Data
Power status
(header 3Fh)
50h 57h Check the Power status. 30h: Standby
31h: Power On
32h: Cool Down
34h: Warning
Active Input
(header 3Fh)
49h 50h Check which input is active. 30h: S-video
31h: Video
32h: Component
33h: VGA
36h: HDMI 1
37h: HDMI 2
You want to... Command to send
Check if the projector is switched ON
send: 3Fh 89h 01h 50h 57h 0Ah
receive: 06h 89h 01h 50h 57h 0Ah (confirm cmd)
receive: 40h 89h 01h 50h 57h 31h 0Ah (projector is ON)