User manual

9.0 INSTALLATION SETTINGS

R599820 - Blackwing mk2013 User Manual 33

9.5 Pincushion

Compensate distortions that may appear with curved screens or anamorphic setups.

9.6 Anamorphic

• Off: No modiﬁcation to original picture.

• Mode A: The picture is vertically stretched to ﬁt an installation with anamorphic lens. A cinemascope picture is

stretched to completely ﬁll the panels without black bands, using the optimum resolution and brightness.

Anamorphic Mode A.

• Mode B: This setting squeezes horizontally the picture to ﬁt a 16:9 image into cinemascope screen. This setting

is to be used with an anamorphic installation where the lens is permanently ﬁxed in front of the unit and to watch

16:9 content in its original format.

Anamorphic Mode B.

9.7 Screen Adjust

This setting corrects the color balance derived from the reﬂective characteristics of the screen without altering the

global picture settings. You may select:

BW1 only:

• Off: no modiﬁcation.

• Mode A: slightly reddish.

• Mode B: slightly greenish.

• Mode C: slightly bluish.

BW2 & 3:

• 001 - 009: select a proﬁle between 001 and 009 when watching 3D content with 3D shutter glasses. Proﬁle 001

is recommended when using Cineversum’s active IR 3D-glasses.

• 010 to 105: select the best compensation proﬁle depending on your screen and environment.

NB: When a 3D signal is fed the Pincushion correction is inactive.

NB: When a 3D signal is fed the Anamorphic mode is reset to Off

SDTV (2.35)

WITH ANAMORPHIC LENS

HDTV (2.35)

Off Mode A

2.35 SOURCE

SDTV (16:9)

WITH ANAMORPHIC LENS

HDTV (16:9)

Off Mode B

16:9 SOURCE