User manual

6.0 MENU AND PICTURE SETTING
34 R599810 - Blackwing mk2012 User Manual
Displays the active video input.
Input Source Format
Displays the type of the current video input signal. If PC input is selected, this item cannot be displayed.
Deep Color Depth
Display the bit depth (color depth) of the video signals input from the HDMI terminals. Deep Color is not displayed
for YCbCr 4:2:2 signals.
Resolution
If the active input is PC input., its resolution is displayed.
H. Frequency
In the case of PC signal, the horizontal frequency is displayed.
V. Frequency
In the case of PC signal, the vertical frequency is displayed.
Lamp Time
Displays the accumulated hours of usage of the lamp.
Calibrator
Stores up to 18 ASCII characters set by the Calibrator. Shown only if set during calibration.
6.8 Expert Calibration (BW2 & 3)
Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional sets
of Picture Modes can be activated. Each set designated as THX and ISF profiles have to be calibrated. Once done,
these profiles are stored and displayed in the picture mode menu list but will not be modifiable. Additionally the
Calibrator can certify his action by setting in the Information Menu his name or company name. See “RS-232C
protocol”, page 40 for more details.