User manual

6.0 MENU AND PICTURE SETTING
30 R599810 - Blackwing mk2012 User Manual
6.3.0.4 Crosstalk Cancel
Can be adjust with a 3D signal input but not when 2D to 3D Conversion is On. This
function is to lessen the residual cross-talk found between 3D video images. Adjust
the Parallax value and then the Cross-talk settings in order to cancel the residual
cross-talk without loosing picture quality.
Adjustments White, Red, Green and Blue: -8 +8
6.3.0.5 Intensity (2D to 3D Conversion is On)
Use this function to adjust depth perception during 2D to 3D conversion. Adjust
setting from 1 up to 5.
6.3.0.6 Subtitle Adjust (2D to 3D Conversion is On)
Use this function to automatically identify subtitles during 2D to 3D conversion. There
may be instances where automatic identification does not work, or video images are
accidentally identified as subtitles and therefore not converted into 3D. Set if On or
Off.
6.4 Installation Menu
Lens Control
This menu gives access to the control of the lens. Browse into this menu to adjust:
6.4.0.1 Focus
Adjust the lens focus to obtain a clear picture.
6.4.0.2 Zoom
Adjust the lens zoom to fill the screen with the picture.
6.4.0.3 Shift
Adjust lens shift to center the picture into the screen.
6.4.0.4 Image Pattern
If set to On, an internal pattern will be generated to adjust the current setting. If you
want to use an external generator, turn this option to Off.
6.4.0.5 Lock
Once the Lens is correctly set, you may lock this setting menu by turning the Lens
control Lock to On. Any attempt to access the Lens control menu will lead to the
display of a warning message.
6.4.0.6 Lens Memory Select
Call up saved lens adjustment data to configure the lens to the save settings.
6.4.0.7 Lens Memory Save
Store into memory 1 up to 3 the lens focus, zoom and shift configuration.
6.4.0.8 Lens Memory Name Edit
You can edit the Lens Memory Name within the limit of 10 characters. Same
procedure as Section 6.2.0.6, “User Name Edit”, page 27.
6.4.0.9 Lens Cover (BW2 & 3)
Control the behavior of the Lens Cover:
a. Auto: the lens cover opens or closes when the projector switches On or Off.
b. Open: the lens cover is always open.
Pixel Adjust (BW1 only)
The BW1 picture pixel alignment can be adjusted within 1 pixel steps. This menu allows a fine adjustment of the red
and blue panels separately.
• Horizontal Red and Blue (1 to 5)
•Vertical Red and Blue (1 to 5)
Pixel Adjust (BW2 & 3 only)
The BW2 & 3 pixel adjustment is extremely fine: each color can be adjust within 1/16 pixel steps on 121 individual
adjustment zones.
6.4.0.1 Adjust
Enable the pixel adjustment On or Off.