User manual

6.0 MENU AND PICTURE SETTING
R599810 - Blackwing mk2012 User Manual 29
• Phase: Adjust flickering and blurred pictures.
• Picture Position: Adjust the display position of the picture.
Picture Position
Depending on your source, you may find that the picture should be adjusted into the screen, adjust the horizontal
and vertical position of the picture into the screen.
Some signals may not be fully displayed, adjust this setting properly when necessary.
Aspect Ratio
When watching a movie or video program, you can manually set the desired aspect ratio to fill your screen. Select
the correct aspect ratio depending on your source:
6.3.0.1 For Video sources
a. 4:3. The original source is considered as 4:3 format. Generally SDTV broadcasts.
b. 16:9. The picture size is 16:9, generally most recent DVDs, Blu-Ray discs or
HDTV broadcasts.
c. Zoom. The zoom function is useful to zoom in the picture and eliminate black
bars.
6.3.0.2 For PC sources
a. Auto. Zoom the picture to fill either the screen height or the screen base which
ever happens first.
b. 1:1 mode, pixel to pixel mapping, no scaling.
c. Full. Stretch the picture full screen
Mask
Depending on your source, you may enable or disable this feature to hide the outer area of the picture. The Mask
function can hide the unexpected scaling artefacts found in broadcast program. You can set it to Off, 2.5% or 5%
globally or for each side of the screen.
Progressive (only 480i, 576i, 1080i)
Interlaced signals are converted to progressive signals using video images from the surrounding. This function is
only available for interlaced input signals: 480i, 576i and 1080i.
3D Setting
6.3.0.1 3D Formats
Use this function to choose the correct 3D input format. Some input signals may
contain 3D data such as 1080p Side-by-Side but encoded as if they were in 2D. This
unit may treat them as standard 2D signals and will not project correctly. In such
cases, configure the signal manually between Side-by-Side, Top & Bottom and 2D. In
other cases, you may select Auto setting.
6.3.0.2 2D to 3D Conversion
You can use the 2D to 3D Conversion to convert 2D pictures into a quasi-3D picture.
The quality of the result may differ from quality of original 2D picture. Turn it On or
Off.
6.3.0.3 Parallax
Use this function to adjust the amount of misalignment of the left and right 3D video
images. Adjust settings according to your preference between -15 and +15.
This option may reduce eye-strain produced by a strong 3D effect with a low setting
or enforce a too soft 3D effect with a high setting. The correct Parallax value also
depends on your projection screen size.
When watching 3D content, only 16:9 aspect ratio is available.
The parallax is an important parameter for 3D movies that directly affects comfort during 3D projection. It is
admitted that generally the maximum value of the parallax must not exceed 6,5 cm which is an average
value of people’s distance between their left and right eyes and because the parallax value changes with
the screen size, it is important to set this parameter to a value with which everyone feels comfortable with the 3D
effect. In general, women and children have smaller faces and may feel better with a smaller parallax value. Do not
hesitate to alter this settings if you feel eye-strains or headaches.