User manual

6.0 MENU AND PICTURE SETTING
R599810 - Blackwing mk2012 User Manual 27
6.2.0.2 Noise Reduction (SD video only)
a. RNR: Random Noise Reduction. You can set it from 0 up to 16 to reduce the
picture random noise.
b. MNR: Mosquito Noise Reduction function is used to reduce the Mosquito noise
on the picture, generally found in compressed digital video signals such as
television broadcast or encoded movies. Adjust the MNR value from 0 up to 16 to
reduce the typical broadcast picture mosquito noise
c. BNR: Block Noise Reduction uses a large portion of the picture to reduce the
digital noise, this ensures a higher quality filter. Adjust the BNR value to On or
Off.
6.2.0.3 CTI (SD video only)
Color Transition Improvement. Set it to Off, Low, Middle or High to reduce the color
smear (color contour correction). Caution: this function may alter the original picture
chrominance.
6.2.0.4 Color Space (BW1 only)
Standard: Digital Cinema Initiatives (DCI) color space.
Wide1: wider color gamut than standard. Color space used for HDTV.
Wde2: same color space as DCI but within a wider color gamut
6.2.0.5 Color Management (TSL adjustments BW2 & 3 only)
The Color Management gives the installer an unique calibration ease with the
integrated Color Adjustment menu: each primary, secondary colors and orange can
be independently calibrated to obtain a precise color balance in a snap.
Adjust the Red, Green, Blue, Yellow, Cyan, Magenta and Orange Tints, their
saturations and luminances and store them into Custom1, Custom2 or Custom3
profiles.
6.2.0.6 User Name Edit
You can edit the picture modes names User1 to 5 using a maximum length of 10
characters. You can use alphabet letters, numbers and symbols:
a. Select the user name you want to edit from User1 to User5.
b. Press [OK] to enter the edit mode.
c. The input cursor displays the place where the new character will be insert. It will
move automatically as a character is selected. Use [UP], [DOWN], [LEFT] or
[RIGHT] to select a character and press [OK] to insert it.
d. Press BACK] to exit edit mode.
Clear: To delete a character: Move the cursor to the desired location and press [OK]
to delete the specific character.
All Clear: To delete all characters.
OK: To save the current name, a save confirmation will appear.
6.2.0.7 Crystal Motion Drive (120Hz)
The Crystal Motion function uses a 120Hz video processing to render a smooth and
clear motion for movies shot at 24Hz or HD movies at 60Hz. Set the correct level
between:
Mode1: weak black frame insertion
Mode2: strong black frame insertion
Mode3: weak interpolation
Mode4: strong interpolation
Film Motion: inverse telecine interpolation
User Name Edit
MENU
BACK
!
!
Name
User 1
Clear
All Clear OK
Exit
Select
Operate
Picture Adjust
SPACE
Select cursor Input cursor
Character list