User manual

6.0 MENU AND PICTURE SETTING
26 R599810 - Blackwing mk2012 User Manual
•A (3D): bright picture.
•B (3D): classic.
• Film1: Eastman gamma
• Film2: Fujifilm gamma
• Film3: more tone than Film1
• Film4: more contrast than Film2
• Gamma A: focus on tone
• Gamma B: for film and movie projection (S curve).
• Gamma C: for film and movie projection with more detailed blacks than setting B.
• Gamma D: this setting is recommended for bright midtones and Computer like projection.
• Custom1
• Custom2
• Custom3
The Custom data can be set to:
• Correction Value: a unique value that will act as a gamma coefficient between 1.8 and 2.6.
• Gamma Adjustment: the gamma curve can be adjusted for each color Red, Green and Blue.
• Copy: copy the adjusted values to temporal memory.
•Paste: paste values stored in memory to current profile.
• Reset: reset to the default 2.2 gamma coefficient.
Gamma Adjustment can be copied from all modes. Paste can only be used for Custom modes.
Dark / Bright Level
This setting modifies the gamma curve locally in the dark and bright areas.
• Dark Level adjust gamma curve between 0IRE and 15IRE, from -7 to +7.
•Bright Level adjust gamma curve between 85IRE and 100IRE from -7 to +7.
Picture Tone (BW2 & 3 only)
It allows a fine adjustment steps of the global picture brightness while maintaining the correct contrast level to keep
good black and bright levels. Available when Film Picture profile is selected:
• White: sets the overall exposure from -16 (under-exposed, darker) up to +16 (over-exposed, brighter)
• Red/Green/Blue: to set individually each color channel exposure.
Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A
correct contrast setting is important for good image reproduction. Adjust the Contrast value between -50 and 50.
Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between -50 and 50.
Color
The Color function (or Saturation) is used to adjust the saturation levels. Adjust the Color value between -50 and 50.
Tint
The hue function is used to adjust the color tint to obtain true color reproduction. Adjust the Tint value between -50
(more red) and 50 (more green).
Advanced
6.2.0.1 Sharpness
a. Sharpness: this function is used to adjust the image sharpness of the picture.
Adjust the Sharpness value between 0 (soft) and 50 (sharper but noisier).
b. Detail Enhancement function is used to improve picture details such as strong
lines and color separations in order to make them stand out. Set it between 0
(soft) and 50 (strong).