User manual

13.0 APPENDIX: INPUTS AND SIGNAL COMPATIBILITY
R599791 - FORCE 3D User Manual 95
• Dual HD input
• SDI, HD-SDI
13.6 RS-232
Number of ports: 2
• Connector 1 female 9-pin Dsub (IN)
•1 male 9-pin Dsub (OUT)
Max bit rate 115.2 kbps
Flow control Xon/Xoff
13.7 RS-422
Number of ports: 1: Connector 1 female 9-pin Dsub
Max bit rate 115.2 kbps
Power output 12 V ±5% @ 400mA maximum
13.8 Ethernet
Number of ports 1
Standard 10/100 Base-T
Connector Female RJ-45
13.9 USB 2.0 Device Port
• Number of ports 1
• Standard Supports: mass storage device type, Ethernet device type, and/or serial device type.
• Connector USB type B (full size)
• Max bit rate 3-12 Mbps (high speed 480 Mbps not supported)
13.10GPIO
Number of I/O Lines 7
Connector Male 9-pin Dsub
Output sink current (logic low) 100 mA @ 1V typical
Power output 12 V ±5% @ 400mA maximum