User manual

12.0 APPENDIX: SPECIFICATIONS
92 R599791 - FORCE 3D User Manual
• Green – Projector is powered up and operating normally
• Flashing green/yellow – Projector communication in progress
• Flashing red – Error has occurred. Details are displayed on the status display
Shutter:
• Green – shutter is open
•Yellow – shutter is closed
Video processor features
• Video Format Re-Sizing
• Picture in Picture
• Seamless Switching (requires to be in ’free run’ mode (not Framelock)
• Built-in 2D keystone and geometry correction
•Auto-scaling
•Auto-de interlacing
• Edge blending
•Warping
• Tiling (support for up to 3x3 arrays)
• Blanking and Image positioning
•Brightness, contrast, color, and uniformity
• user settable control
• Image orientation
• Electronics HW access
• Number of option cards
• Number of processor cards
• Number of option slots
• Native format adjustment
• Arbitrary Gamma
12.3 Operating Conditions
Power Consumption
• 200 W 1080p 871W (dual lamp) 607W (single lamp)
• 150 W 1080p 739W (dual lamp) 541W (single lamp)
Rated Current (dual lamp operation) 200 W 1080p 9 A @ 100 VAC
Line frequency 50/60 Hz
AC Input Coupler 15 A, 250 VAC
Type of connector IEC 320-C14 with wire cable clamp
Operating Position
Horizontal ±20 degrees allowable rotation about lens axis
Inverted ±20 degrees allowable rotation about lens axis
Rotation ±180 degrees perpendicular to lens axis
Reliability
MTBF – excluding consumable components 15,000 hrs
Consumable components Air filters, fans, lamps
Temperature/Humidity/Altitude
Operating temperature range 5 to 40 degrees C
Storage temperature range -40 to 70 degrees C
Humidity range 10% to 80%, non condensing
Operating Altitude 10,000 ft. maximum
Regulatory
This product conforms to the following regulations related to product safety, environmental requirements and