User manual

12.0 APPENDIX: SPECIFICATIONS
90 R599791 - FORCE 3D User Manual
Single lamp Full white ANSI 13-pt. (w/o electronic correction.) +25%, -35%
Full white ANSI 13-pt. (w/ electronic correction.) +5%. -5%
Full black ANSI 13-pt. Negative uniformity shall be between -35% and 0% and positive uniformity shall be between
0% and +35%.
Color Uniformity
Full white ANSI 13-pt. ±0.005 cluster on u’,v’ chart (CIE 1976)
Full black ANSI 13-pt. ±0.075 cluster on u’, v’, chart (CIE 1976)
Color Primaries
ANSI 9 point measurement without Yellow Notch Filter x y:
ANSI 9 point measurement with Yellow Notch Filter x y
Gamma
Default Gamma (all points from 10 to 90 IRE): 2.2 + linear segment
Adjustable Gamma range 1.0 to 3.0
Color Temperature
Range of Adjustment 3200 K - 9300 K
Tracking (deviation from normal over full range from 10 – 100 IRE)±500 K max
Stability (during rated lamp life) ±500 K max
Convergence Error
Convergence zones A, B, C are as defined in figure below. Zone A has a diameter 1/4 of the image height. Zone B
has a diameter of full image height. All specified convergence errors are between any two colors after a minimum
warm-up of 30 minutes.
Convergence Error
Pixel Defects
ILS (Intelligent Lens System)
• Motorized lenses and lens mount with position encoding
• Zoom, focus, horizontal and vertical offsets
• Accuracy ±2 pixel
Red 0.665 ± 0.025 0.335 ± 0.025
Green 0.343 ± 0.040 0.640 ± 0.040
Blue 0.145 ± 0.020 0.050 ± 0.025
White 0.300 ± 0.050 0.045 ± 0.025
Red 0.670 ± 0.025 0.330 ± 0.025
Green 0.300 ± 0.040 0.673 ± 0.040
Blue 0.148 ± 0.020 0.045 ± 0.025
White Default CCT (without YNF) 8900K ±2000K 200W Lamp
White YNF CCT
(with YNF activation, electronically corrected)
6500K ±1000K
Red 0 bright, 1 dark
Green 0 bright, 0 dark
Blue 0 bright, 2 dark non-adjacent
A
B
C
Zone A: 1/4 pixel
Zone B: 1/2 pixel
Zone C: 3/4 pixel