User manual

12.0 APPENDIX: SPECIFICATIONS
R599791 - FORCE 3D User Manual 89
12.0APPENDIX: SPECIFICATIONS
12.1 Key features
• Up to 10,000 lumens
• Full-HD (1920x1080) resolution
• Dual Mercury lamp illumination at 200W
• Dynamic iris contrast aperture providing up to 10,000:1 contrast ratio
• Ultra-compact design and weighs less than 55lbs
• 10-bit image processor electronics with modular design
• Fully sealed optical system
• Active fan control for minimum noise level
• Selectable, motorized yellow notch filter for expanded color gamut (HDTV)
• User interchangeable projection lenses with no-tool mounting
• PIP and seamless switching
• LiteLOC for constant brightness maintenance
• Intelligent Lens System (ILS)
• Motorized lens
•Auto-setup feature
• Networking ability through RS-232 and RS-422 connectors
• Status LED display on built-in keypad for easy projector status monitoring
• Control with remote keypad, wired remote, or built-in keypad
•Four input slots for Optional Input Modules
12.2 Image Performance
Pixel Format
1080p (H x V square pixels) 1920 x 1080
Brightness (ANSI Lumens):
Contrast
ANSI: 16 pt. checker pattern on black screen 650:1 typical
Full field: 9 pt. average ON/OFF with background light subtraction: 2500:1 typical (full open aperture)
Dynamic 10000: 1 typical (with dynamic aperture)
Luminance Uniformity
Dual lamp Full white ANSI 13-pt. (w/o electronic correction.) +15%, -25%
FORCE ONE
<800 lumens single lamp / 150W / iris closed
1500 lumens single lamp / 150W / iris opened
2250 lumens single lamp / 200W / iris opened
3000 lumens dual lamp / 150W / iris opened
6000 lumens dual lamp 200W / iris opened
FORCE TWO
<2000 lumens single lamp / 300W / iris closed
4000 lumens single lamp / 300W / iris opened
5200 lumens single lamp / 350W / iris opened
8500 lumens dual lamp / 300W / iris opened
10000 lumens dual lamp 350W / iris opened