User manual

9.0 WEB USER INTERFACE
R599791 - FORCE 3D User Manual 79
a. Enter the Logo position for the X and Y fields.
b. Click the Color square to open the Choose Background Color window, choose the desired background color from
the color palette, and click OK. The color square changes to the selected color.
c. Click the Upload button to display the Logo Upload window. Click Yes or No to confirm or cancel the upload.
An Upload in Progress window appears.
4. Click the Upload button to display the Logo Upload window.
a. Enter a descriptive name in the Display Name field.
b. Click the Upload button to display the Gamma Upload window. Click Yes or No to confirm or cancel the upload
respectively.
An Upload in Progress window appears.
• Creating a Backup File
1) Select a file type (All, Preferences, Configuration, Channels, or Users) from the Backup drop-down list.
2) Click Backup to initiate the download. A Backup in Progress bar appears. Once finished, a File
Download window appears.
3) Click Save to open a Save As window.
4) Locate and select a folder within your Network drive or hard-drive where you wish to save the file.
5) Click Save.
• Restoring a File
1) Click the Browse button to open the Choose file window.
2) Locate and select the file you wish to restore from a Network drive location or from your hard drive.
3) Select a file type (All, Preferences, Configuration, Channels, Users or Real Time Events) from the Restore
drop-down list.
NOTE: DO NOT select All unless transferring all files from one projector to another or cloning.
4) Click Restore to initiate the restore. A Restore in Progress bar appears. Once finished, a confirmation
message appears.
•Performing a Diagnostic Test using Interrogator
1) Select an Interrogator level (Basic or Advanced) from the Interrogator drop-down list.
2) Click Interrogate to initiate the diagnostic test and download the diagnostic test results to your computer.
A Interrogator in Progress bar appears. Once the download is complete, a File Download window appears.
3) Click Save to save the diagnostic test results file to your Network drive or hard-drive.
Admin Tabbed Page - Users
Under the Admin tabbed page, select the User secondary tab. Options are provided to add to and delete users from
accessing the projector, and change passwords.
NOTES:
1) Do not use capitalization for usernames or passwords. If capitalization is used for the username or password,
it will automatically convert it to lower case.
2) Usernames can be a minimum of 4 and maximum of 32 characters. passwords can be a minimum of 4 and
maximum of 128 characters.
Advanced Tabbed Page - RTE
The RTE secondary tabbed page is where you can manage real-time events (i.e. add, delete, edit, copy and setup
the GPIO) as described in the following section.
•RTE Buttons
The real-time event buttons include the following:
• Add, create a new event
• Delete, remove one or multiple existing events
• Delete All, remove all events
• Edit, change or add information for an existing event
• Copy, clone an existing event
• Stop, discontinue the event running
• GPIO Setup, used to configure the GPIO pins as inputs/outputs and to set the current state of the output pins
•To add a scheduled Event
1) Click Add to open the RTE Wizard.
2) Select the Scheduled Event tab.