User manual

6.0 MENU AND PICTURE SETTINGS
R599791 - FORCE 3D User Manual 39
4. Configuration 8. Geometry & Color 7. Black Level Blending
1. Black Blend Enable?
2. Test Pattern
3. Left Blend Width
4. Right Blend Width
5. Top Blend Width
6. Bottom Blend Width
7. Center Brightness
8. Left Brightness
9. Right Brightness
10 Top Brightness
11. Bottom Brightness
12. Top Left Brightness
13. Top Right Brightness
14. Bottom Left Brightness
15. Bottom Right Brightness
8. Default Color Adjustment
9. Default Color Adjustment with YNF
9. Diagnostics & Calibration 1. Test Pattern
2. Grey Level
3. Freeze Image
4. Color Enable
5. Input Peak Detector
6. Input Level Detector
7. Level Detector Threshold
8. Aspect Ratio Overlay
9. Test Pattern Color Swap
10. Calibrate LiteLoc
11. Freeze Image during Auto Setup
12. Advanced Diagnostics
1. Output Peak Detector
2. Output Level Detector
3. Level Detector Threshold
4. Light Engine Test Pattern
10. Service Require Service Password
11. Option Card Settings
(This menu will be filled with types
that match cards plugged in)
1. Standard Video Input Card
1. Grouped Inputs Mode
2. Connector 1 Grounding
3. Connector 2 Grounding
4. Connector 3 Grounding
5. Connector 4 Grounding
6. Connector 5 Grounding
7. Connector 6 Grounding
2. Dual SD/HD-SDI Input Card
1. Dual Link Mode
3. Dual Link DVI Input Card
1. Dual Link Mode
4. Twin HDMI Input Card
1. EDID Timings for Input 1
2. Tx Mode for Output 1
3. EDID Timings for Input 2
4. Tx Mode for Output 2