Installation Instructions

30.
CLR-C1-CO
Indicator Summary
Normal Operation
Red LED Amber LED Green LED Sounder
Power Up
1 flash 1 flash 1 flash Off
Standby Off Off
Off Off
Button Test (Weekly)
Off Off
Flashing (every sec) Temporal full sound
Unit Sensing CO gas itself
Flashing (as per table B)
Off Off
Temporal full sound
SensingCO through RF interconnect
Off
Off Off
Temporal full sound
Fault Mode
Low Battery Condition Off
1 flash (every 50 secs)
Off
1 beep with flash
Sensor Fault Condition
Off
2 flashes (every 50 secs) Off
2 beeps with flash
End of Life Condition
Off
3 flashes (every 50 secs) Off
3 beeps with flash
Service Diagnostics
Diagnostics Modes
Action Red LED Yellow LED Sounder Action
Fault Checks
Low battery Press & hold button Off 1 flash 1 beep with flash
Replace Batteries
Faulty Sensor Press & hold button
Off 2 flashes
2 beeps with flashes Replace Alarm
End of Life (EOL)
Press & hold button
Off
3 flashes
3 beeps with
flashes
Replace Alarm
Alarm Memory
Action Red LED Green LED Sounder LCD Display
24 hours after event
Flashes as per Table C
Off Off Off
Long term memory
Press & hold button
Flashes as per Table C
Off
Temporal full sound
CO ppm
Memory Erase
Keep button pressed
after long term test
Flashes as per Table C
Wait for Green light
then release button
Temporal full sound
CO ppm