Installation Instructions

25.
9. Getting the CO Alarm Serviced
If your CO Alarm fails to work after you have carefully read all the instructions,
verified that the unit has been installed correctly, and ensured that it has good
batteries connected, return it for repair or replacement. This should be where it was
purchased.
Some states or jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitations on how long an implied warranty last so the
above limitation may not apply to you.
Do not interfere with the Alarm or attempt to tamper with it. This will invalidate the
guarantee, but more importantly may expose the user to shock or fire hazards. This
guarantee is in addition to your statutory rights as a consumer.
11. Limitations of CO Alarms
(1) The CO Alarm will not work without good batteries or if the batteries are placed
in reverse polarity. If the batteries have been drained the Alarm will not give
protection. Button test the Alarm weekly and on return from vacations or other long
absences.
(2) Carbon Monoxide must enter the unit for it to be detected. There may be Carbon
Monoxide in other areas of the house (e.g. downstairs, in a closed room etc) but not
in the vicinity of the CO Alarm. Doors, air drafts and obstructions can prevent CO
from reaching the Alarm. For these reasons we recommend CO Alarms are installed
both near and in bedrooms, particularly if bedroom doors are closed at night.
Additionally install in rooms where members of the household spend much of their
time, and in rooms with potential sources of CO gas.