Installation Instructions

23.
poisoning as described above. If any of these signs are present get the appliance
serviced before further use. If feeling ill, get immediate medical help.
(2) Choose all appliances and vehicles which burn fossil fuels such as coal, oil,
natural gas, propane, kerosene, wood, gasoline, diesel, charcoal etc. with care and
have them professionally installed and regularly maintained.
(3) These appliances must “breathe in” air to burn the fuel properly. Know where the
air comes from and ensure vents remain unobstructed (particularly after any
construction or remodeling work).
(4) The appliances must also “breathe out” waste gases (including the CO) – usually
through a flue or chimney. Ensure chimneys and flues are not blocked or leaking,
and get them checked every year. Check for excessive rust or cracks on appliances
and pipe work.
(5) Never leave your car, motor bike or lawnmower engine running in the garage
with the garage door closed. Never leave the door from the house to the garage
open if the car is running.
(6) Never adjust your own gas pilot lights.
(7) Never use a gas stove, cooktop or a barbecue grill for home heating.
(8) Children should be warned of the dangers of CO poisoning and instructed never
to touch, or interfere with CO Alarms. Do not allow small children to press the test/
hush button as they could be subjected to excessive noise when the Alarm sounds.
(9) Leaving windows or doors slightly open (even a few inches) will significantly
reduce the risk of high levels of CO occurring. The high levels of draught-proofing in
modern houses reduces ventilation and can allow dangerous gases to build up.