Installation Instructions
Table Of Contents
- Table of Contents
- 1. Read This First
- 2. Carbon Monoxide – The Silent Killer
- 3. Where to Place CO Alarms
- 4. Installation
- 6. What to do when the alarm sounds
- 7. How to Protect your Family
- 8. Technical Specification
- 9. Getting the CO Alarm Serviced
- 11. Limitations of CO Alarms
- 12. Troubleshooting
- 13. Display & Indicator Summary
17.
Figure 6a Figure 6b Figure 7
5. Testing / Monitoring & Maintenance
Testing
Frequent testing of the system is a requirement to ensure its continued and safe
operation. To test the Alarm press the hold the test button.
The Green LED will flash and the horn will ramp up to full sound to indicate the
Alarm is operating correctly.
Guidelines and best practices for testing are as follows
1. Immediately after the system is installed or upgraded
2. Once weekly thereafter
3. After prolonged absence from the dwelling (e.g. after extended vacation)
4. After any significant home repairs or remodeling work.