User Manual

36
Server’s IP address to a different network segment, you can uncheck the option. However, in this
case, you also have to change the network configuration of your computer so that you can log in to
the server.
After all the information filled and checked, click “Apply” button. If successfully changed, a prompt
window shows “Setup network options success”. Click “OK” to close the window. A window will pop
up in the lower right corner and display “IP address of the server has been changed. Reconnecting…”
and then “Connect to the server”, otherwise you will have to reconfigure network settings.
If there’s another user logging on the server at this moment, he/she will receive the said messages and
their PC will re-connect to the Server several minutes later.