User Manual

15
2.2.2 Professional Edition H5/H5S
Fig 2.4 Front panel of Professional Edition H5/H5S
LED
Item
Status
Description
PWR
Power state
On
Power on.
Off
Power failure.
LINE
Telephone line status
On
The port is connected to a telephone line.
Flash
The port is connected to a telephone line.
Off
The port is not connected to a telephone line, or in
off-hook status.
LAN
Network status
On
The port is connected to a network.
Off
The port is not connected to a network.
Flash
Sending or receiving network data packets.
READY
Server status
On
Server is running.
Flash
Server is initiating.
Off
Server failure.
NEW
New fax notification
Off
No notification.
Flash
Notifies you have new fax(es).
DATA
Storage status
On/Flash
The storage is reading or writing data. Power off at this
time may cause data loss.
Off
The storage is idle.
Note: * LINE2 LED doesn’t work on one-line Server.
Other signals: LED flashing in sequence from READY to VOICE means server is updating system. Server “beep”
codes: a single beep per 3 seconds (telephone line is disconnected); beeps repeating 1 long 2 short (server failure)