User Manual

2
Safety precautions
Please read the following information before deploying the products.
Beware of the warnings and use the product in accordance with instructions labelled on the hardware.
Warnings:
● Do not expose the equipment to liquid, moisture or high humidity.
● The equipment must be placed on a stable platform in case of sliding and breaking.
● Overheating prevention: slots on equipment are for cooling and circulating. Please do not jam or
cover these slots. Besides, please keep the equipment away from warming or heating objects.
● Nothing but the specified accessories could be inserted into the ports of the equipment.
● Please use the supplied power adapter. Uncertified third-party adapter may cause short circuit, even
fire or electrical shock.
● Do not splash liquids of any kind on the equipment.
● To avoid damaging or loosening of internal elements, do not place the equipment on vibrating surface.
Power Supply Requirements
● This equipment works only with the voltage stated on the label. If you are not sure about what the
voltage is in your office or home, please consult local distributor or electric power department.
● Do not use the power adapter in moisture environment.
● Power adapter for this product could be plugged in two- or three-wired grounding receptacle. Please
make sure that the receptacle is correctly grounded.
Caution! Ground pin guarantees safety. Using ungrounded receptacle may cause interference, electric
shock and/or injuring.
Note: Ground pin also helps shield the products from possible interference noise generated by other
electronic devices nearby.