User's Guide

ManualsBrandsCIMCON ManualsElectronicsNearSky 360

CIMCON LIGHTING Inc.

Nearsky360 System User Guide

Doc Version: V3.0

Doc Date : 25-MAR-2019

For internal use only Page 1

NearSky™ 360 V2.0

User Guide

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical,

for any purpose, without the express written permission of CIMCON Lighting, Inc. Information in this document is

subject to change without notice. CIMCON Lighting, Inc. may have patents or pending patent applications, trade-

marks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of

this document does not give you license to these patents, trademarks, copyrights, or other intellectual property ex-

cept as expressly provided in any written license agreement from CIMCON Lighting, Inc.

Summary of content (13 pages)

PAGE 1
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 NearSky™ 360 V2.0 User Guide No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of CIMCON Lighting, Inc. Information in this document is subject to change without notice. CIMCON Lighting, Inc.
PAGE 2
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Revision history: VerRev Date 1.0 28th Mar, 2019 2.0 20 APR 19 Block diagram updated 3.
PAGE 3
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Installation Guide How to connect peripheral devices with NearSky 360 Step-1: Connect POE compatible camera with connector “LAN2” as shown in below snapshot. LAN2 Step-2: Connect Modbus supported sensor with NearSky 360 as per below snapshot.
PAGE 4
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Step-3: Connect USB device as per below snapshot.
PAGE 5
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Step-5: Connect 4 pin AC power out connector supplied with unit for external sensor powering.
PAGE 6
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.
PAGE 7
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.
PAGE 8
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Transmit Power: Changing Wi-Fi parameters or software updates Initial user ID and Password will be assigned to authentic user that can access the device and further manage Wi-Fi user ID, password, IP address etc. later. But Wi-Fi parameters, i.e. Channel, Power etc., no one can access OR change it. Same is secured through security key which is generated and managed by CIMCON only if needed to change in future.
PAGE 9
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Module part used is ‘TiWi-BLE’ from LSR: It is integrated Transceiver Modules for WLAN 802.
PAGE 10
CIMCON LIGHTING Inc. Nearsky360 System User Guide For internal use only Doc Version: V3.
PAGE 11
CIMCON LIGHTING Inc. Nearsky360 System User Guide For internal use only Doc Version: V3.
PAGE 12
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 FCC Statement: FCC ID: 2ALSZ-CLNSV2 This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. FCC 15.
PAGE 13
CIMCON LIGHTING Inc. Nearsky360 System User Guide Doc Version: V3.0 Doc Date : 25-MAR-2019 Description: FXP.830 Freedom Wi-Fi 2.4/5 GHz Dipole Antenna. Ground-plane Independent. IPEX MHF1 Connector (U.FL compatible).