Instruction Manual

ManualsBrandsCimarron Firearms ManualsFirearmsSPENCER

AUGUST 2011

ATTENTION: BEFORE REMOVING

THIS FIREARM FROM ITS PACKAGE

READ & UNDERSTAND WARNINGS,

INSTRUCTIONS AND PRECAUTIONS

IN THIS USER’S MANUAL

INSTRUCTION MANUAL

SPENCER

OFFICIAL SPONSOR

Summary of content (24 pages)

PAGE 1
AUGUST 2011 INSTRUCTION MANUAL SPENCER OFFICIAL SPONSOR ATTENTION: BEFORE REMOVING THIS FIREARM FROM ITS PACKAGE READ & UNDERSTAND WARNINGS, INSTRUCTIONS AND PRECAUTIONS IN THIS USER’S MANUAL
PAGE 2
INDEX WARNINGS ...................................................................................................................................................... 3 SAFETY RULES .................................................................................................................................................. 4 IDENTIFYING MARKINGS .................................................................................................................................. 6 MODEL RANGE ................
PAGE 3
WARNINGS The manufacturer is not responsible for damage to objects caused by misuse of the gun or for injuries to persons or animals, or in case of death, caused voluntarily or involuntarily by the gun user. The manufacturer is not responsible for injuries caused by poor maintenance, misuse of the gun, unauthorized or improper modifications.
PAGE 4
SAFETY RULES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. Read the instructions carefully before use. Reading the manual and careful examination of the gun are fundamental to avoid any kind of problem. Be aware that you are handling a firearm; therefore your knowledge and behaviour may affect your life and those of the people close to you. Guns and ammunitions must be kept in separate places. ALWAYS keep guns and ammunitions out of reach of children.
PAGE 5
will stop and contain bullets. A bullet can travel through or past your target with a range up to 1 1/2 miles. If you have any doubt, do not shoot. 25. Never shoot against a solid surface or in a pool of water, the projectiles could ricochet and shoot toward any direction. Don’t shoot up into the sky. 26. Keep all bystanders behind you, standing beside a shooter is not a safe position. Make sure all other shooters and bystanders are well away from the ejection port. 27.
PAGE 6
IDENTIFYING MARKINGS Every gun we produce has a serial number that is marked on the receiver/frame. Close to the serial number you will also find the manufacturers information with the model name and caliber marked either on the frame or the slide as required by law. These markings must not be removed from the firearm for any reason.
PAGE 7
 If the bullet is not properly seated tightly in the cartridge case. When such a cartridge is extracted from the chamber without being fired, the bullet may be left behind in the bore at the point where the rifling begins. Subsequent chambering of another cartridge may push the first bullet further into the bore.  If there is any reason to suspect that a bullet is obstructing the barrel, immediately unload the firearm and look through the bore. It is not sufficient to merely look in the chamber.
PAGE 8
CALIBER L in L in mm Inches 56/50 Spencer 38,56 1,518 45 LC 40,64 1,600 44/40 Win 40,44 1,592 45 S&W Schofield 36,32 1,430 PICTURE “A” LOADING Warning: Keep muzzle pointed in safe direction and follow all safety procedures at all times. Practice these steps with an unloaded gun or dummy ammo until you are completely familiar and comfortable with the procedures. Use live ammo only when you are prepared to shoot.
PAGE 9
5. Remember use only FLAT NOSED BULLETS. You must hold the rifle at an angle so that the cartridges slide down the magazine instead of dropping in. 6. After all rounds have been placed into the magazine well, insert the magazine tube into the magazine well until the magazine tube base is even and 90 degrees to the right of the butt plate. 7. Then rotate the magazine tube base 90 degrees to your left. FIRING 1. Place your protective eyewear and ear protection on. 2. Point the rifle in a safe direction. 3.
PAGE 10
16. Visually inspect the chamber, magazine tube and magazine for any missed rounds. 17. Replace the magazine tube. DISASSEMBLY 1. Unload the rifle. 2. Remove the magazine tube from the magazine well. Unscrew the lever screw 13 (hinge pin) and the lever and breech block assembly out the underside of the action (receiver). Use a hollow ground screwdriver of the correct fit to avoid damage to the screw. Disassembly of the breechblock: 1.
PAGE 11
MALFUNCTION If a cartridge hangs up, binds, jams, or fails to feed, do not force it into the chamber by pushing or striking the lever. Most failure to feed are due to improperly loaded, damaged, or dirty ammunition, or improper rifle handling. If a jam or failure to feed occurs, point the rifle in a safe direction and place the hammer at the half-cock position. Point the rifle barrel towards the sky and remove the magazine tube. Allow all the rounds in the magazine well to slide out off the rifle.
PAGE 12
EXPLODED VIEW SPENCER Instruction Manual – DEC2014 Pag.
PAGE 13
PARTS LIST 920.021 1865 SPENCER CARBINE .56/50 ITEM O98.155 780.017 760.030 730.247 730.203 730.118 730.119 770.009 721.037 730.209 O98.156 790.138 790.140 730.244 O98.032 721.075 REF. DESCRIPTION ITEM REF. DESCRIPTION 76 77 75 63 STOCK COMPLETE 730.299 Stock 790.144 Butt plate 721.076 Magazine catch spring screw O98.159 Magazine base catch screw 770.184 Magazine seat tube 770.109 Clamping tube ring 130.012 Magazine base catch 770.105 Magazine catch spring 720.035 Butt plate screw O98.
PAGE 14
SPENCER Instruction Manual – DEC2014 Pag.
PAGE 15
920.062-084 SPENCER CARBINE 44/40 -- 45LC ITEM REF. O98.155 780.017 760.030 20 22 730.247 23 730.203 730.118 730.119 770.009 721.037 730.209 O98.156 790.138 790.140 730.244 O98.032 721.075 730.220 730.219 770.146 770.081 790.159 770.029 770.083 730.205 770.089 770.082 730.204 O98.157 770.186 24 28 27 26 25 21 37 33 36 63 61 65 64 62 72 70 68 73 67 66 69 770.202 720.034 730.267 720.068 730.226 10 1516-18 55 34 39 40 730.225 730.223 730.221 730.218 770.183 770.027 730.
PAGE 16
SPENCER Instruction Manual – DEC2014 Pag.
PAGE 17
920.061 SPENCER RIFLE .56/50 3 BANDS ITEM REF. O98.155 780.017 760.030 20 22 730.247 730.203 730.118 730.119 770.009 721.037 730.209 O98.156 790.138 790.140 730.244 O98.032 721.075 730.220 730.219 770.146 770.081 790.159 770.029 770.083 730.205 770.089 770.082 730.204 O98.157 770.186 770.202 720.034 730.267 720.068 730.226 730.225 730.223 730.221 730.218 770.183 770.027 730.224 730.436 730.299 790.143 O98.159 770.
PAGE 18
SPENCER Instruction Manual – DEC2014 Pag.
PAGE 19
920.081-085 SPENCER RIFLE 44-40 Win - 45LC ITEM O98.155 780.017 760.030 730.247 730.203 730.118 730.119 770.009 721.037 730.209 O98.156 790.138 790.140 730.244 O98.032 721.075 730.220 730.219 770.146 770.081 790.159 770.029 770.083 730.205 770.089 770.082 730.204 O98.157 770.186 770.202 720.034 730.267 720.068 730.226 730.225 730.223 730.221 730.218 770.183 770.027 730.224 730.436 730.299 790.143 O98.202 770.184 770.279 REF. ITEM REF. STOCK COMPLETE 130.
PAGE 20
WARRANTY CONDITIONS The manufacturer guarantees that our products are scrupulously checked against defects in materials, workmanship and aesthetical and functioning problems. In case you find a defect in one of our products, you should immediately contact the DEALER/SHOP/GUNSMITH where you have bought your gun. The seller will indicate the conditions for the repair, which will be either made directly by them or through our assistance.
PAGE 21
In case, for any valid reason, you do not have the possibility to obtain repair under guarantee at the shop where you bought the firearm, you may contact us directly; we will indicate a local dealer to support you with the repair file: USA - Phone: +1-937-835-5000 e-mail: info@chiappafirearms.com CANADA (Murray Charlton) – Phone +1-778.426.3884 e-mail: murray.mdcent@gmail.com REST OF THE WORLD - Phone: +39/030/9749065 e-mail: info@chiappafirearms.
PAGE 22
Request form REPAIR UNDER GUARANTEE RMA Number ____________________ Please write in the above box the RETURN MARCHANDISE NUMBER 1. Customer data:        Name: ______________________________________ Address : ____________________________________ Town : ______________________________________ ZIP Code : ___________________________________ Phone : _______________Available from ____ to ____ Fax : _____________________ Email address: ________________________________ 2.
PAGE 23
NOTES: SPENCER Instruction Manual – DEC2014 Pag.
PAGE 24
Via Milano 2 - 25010 Azzano Mella (BS) Italy www.chiappafirearms.com email: info@chiappafirearms.com SPENCER Instruction Manual – DEC2014 Pag.