Operating instructions

22 English
{
If there are problems with the unit, please check the following points before contacting the technical service.
No Picture or Sound  Make sure the receiver and the LCD display panel set are both connected to
the power.
Black Screen  Check whether a signal source is selected. See chapter “Select Source”


Remote Control Does Not
Work


Make sure the unit is connected to the power sourrce.
Check whether the batteries are inserted correctly and whether the are
suf¿ciently charged. To do this, insert new batteries for testing.
Message “No Signal “  Check wether the connecting cable is properly connected to the computer
and the respective sockets.
Message “Video not
Supported”
 The resolution or the frequency of the graphic board in the computer
cannot be displayed. Change the settings in the computer.
Picture Scrolls Vertically
 Check wether the connecting cable is properly connected to the computer
and the respective sockets.
Parts of the Picture are not
Displayed
 Check the resolution and the frequency of the graphic board in the
computer. Adjust the settings.
Picture Too Small or Too
Large
 Adjust the settings.
Never open the unit. This may lead to electric shocks and will void the
warranty.