LCD Display CL-46/47CMH10/20, CL-55KMF10 aVVUU Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
This multi-LCD Display system supports high resolution and multi-screen formatGG G127UGSo these monitors can be used individually or all together. There are various designs such as wall-mounting or stand-alone type for the best installation. You can connect the player directly to the LCD Display or network for a remote control. - 3rovides real-time information like weather and traf¿c reports, stock market information, etc.
j CAUTION .......................................................................................................................................2 Important Safety Instruction........................................................................................................3 Precaution .....................................................................................................................................4 Before considering as a failure ..............................................
jh|{pvu CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The /ightning Àash and arrow head within the triangle is a warning sign alerting you of ³dangerous Yoltage´ inside the product. This symbol indicates additional safety instructions in the te[t. This symbol indicates instructions to facilitate the operation.
pGz Gp Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Use only with a cart, stand, tripod, bracket or table speci¿ed by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Do not use this apparatus near water. Clean only with a dry cloth.
w GiGGGGGG Before calling for any repair, check the following and then refer to a near A/S center. X “Tick” sound from the main body. If there is no problem with the screen or sound, the “tick” sound is likely to result from the cabinet lightly shrinking with change of room temperature. The sound does not affect product’s performance. X No image at upper and bottom part of screen.
Please check, that the delivery is complete.
yGj 1 Power On/Off button 2 Numeric buttons 3 Favorite Channel Selection 4 Volume Up/Down 5 Sound Selection (Mono/Stereo/SAP) 6 Picture Mode Selection 7 Sound Mode Selection 8 Control the Cursor in the OSD Menu 9 MENU Con¿rmation 10 Display OSD Menu 11 Information Display 12 DVD Player Function Buttons (Available in the model that has a built-in DVD Player) 13 Temporary Sound Mute 14 DVD Player Function (Available in the model that has a built-in DVD Player) 15 Extern
jGGGv GjGGjGG You can use the Monitor set to connect camcorder and video games. Use the cinch sockets on the rear side of the unit. Connecting the AV Cable 1 Connect the AV cable to the sockets [VIDEO] and the output sockets of the external devices. Connecting the S-Video Cable 1 Connect the S-Video cable to the socket [S-VIDEO] on the rear side of the unit and the output sockets of the external devices.
GjGGGjG Use a 15-pin D-Sub cable or DVI-D cable to connect the LCD display panel set to the computer. 1 2 3 Plug the cable into the output socket of the graphic board. Plug the other end of the cable into the socket [RGB] or [DVI-D]. Adjust the settings of the Monitor picture corresponding to the settings for Monitor operation. See “Settings” on page 10. If the LCD display panel does not receive any signal, adjust the output of the computer.
GpGGiG For the operation of the remote control 2 type R03 1.5V Size AA batteries are included in the delivery. 1 Remove the cover on the back of the remote control and insert the batteries. Notes on Handling Batteries When used properly batteries are a safe and reliable source of energy. However, when misused or not used according to the intention, they may leak. In extreme cases there is a danger of explosion or ¿re.
zG GzGG 1 Press the power switch on the back of the unit. 2 Press on the remote control. This switches the unit on and it can be operated using the remote control. If it is not explicitly stated otherwise, it will be assumed that the unit and the LCD display panel set are switched on and will be operated by the remote control. By default, the unit is set to the english language. For information on how to change the on-screen language later, refer to: “Set Screen Language” on page 16.
GkpwGzGzOuUW¥]`PG Each Screen must have a unigue ID number by DIP switch.
GkpwGzGzOuU^W¥XY^P Each Screen must have a unigue ID number by DIP switch.
GzGpkGGGsjkG G When connecting a number of LCD Dispay Panel through Displaychain(Link), surrounding noise may come out lower the image quality. Daisy chain can connect with LCD display panel to maximum 16EA. (by DVI) But, If you need additional connection, you must connect daisy chainusing distributer.
Connecting S-video Cable Connecting VGA Cable 14 English
1 Connect the supplied power cord. Don,t plug another AC power cord into extension cord. It’s a good to start a re.The maximum current is 15A in normal extension cord. The maximum current must be restricted 15A. -The Model CL-46/47CMH10/20 can be con gured serially maximum 4 SETS in USA (AC100V). -The Model CL-46/47CMH10/20 can be con gured serially maximum 10 SETS in Europe (AC220V). -The Model CL-55KMF10 can be con gured serially maximum 4 SETS in USA (AC100V).
GzGzGsG The screen display text can be displayed in several languages. Use this function to set screen language. By default, the unit is set to the english language. Picture Audio Mode Brightness Mode Contrast Standard Black Level Sport Sharpness Natural Colour Mild Tint Custom Move Timer Channel Setup Option Custom OK 50 50 50 50 50 Select MENU 1 2 3 4 5 6 7 Press . Press Ż or Ź and select Setup. Press Ÿ or ź and select OSD Language. Press .
Set Video Resolution (1280/1360) 1 2 3 4 Repeat steps from 1 to 4 in chapter “Set MISC.” Press Ÿ or ź to select 1280/1360. Press Ż or Ź to select desired setting. Press . GzGzGOtGpP Use this function to select which signal will be displayed on the main screen, if you have connected several sources (e.g. a decoder and a roof aerial). 1 Press Main Input Video S-Video .
yGj GDefault Display 1 1 2 2 4 3 COM SET 4 5 ZOOM Communications Port Setup Display enlargement / reduction PANEL Real : Display full screen on each panel Zoom : Display full screen on 2x2 Multi Screen Setup Set up number of screen on X-Axis Set up number of screen on Y-Axis 3 INPUT Select input source Select input source on chosen screen GTo adjust settings, you should press “Apply”key.
yGj G Multi Tap 1 2 3 4 5 1 POWER ON/OFF u choose. 2 GAP Set up gap between screens. 3 4 5 : Fix gap up-and-down. : Fix gap left-and-right. Multi Display Window APL Code Each unit set exchanges hte APL (Average Picture Level) information each other on same time. The controller (APC) feeds back appropriate picture level each unit set. It is automatically set up when you press the “zoom” key, and if you add optional code, choose the code value and press the “Apply”button.
yGj G Color Tap 1 2 3 4 5 8 6 7 9 1 Brightness 6 hGGGU 2 Contrast 7 hGGGU 3 4 8 Sharpness hGzGGU Freeze Image zG¡TU OGiSG GGGUGP Tint hGGGU 5 Auto Geometry Setup zGGGGˈyniˉU OG~GG GSGGGGGTGP Color Saturation hGGGGU Auto Color Balance iGGGG
yGj Remote Tap U Remote tap is used to set up for “Multi”, “Color”, “Picture”. It can also substitute for the operation of remote control unit for additional adjustment. U Factory Mode Choose “Set” for Factory Mode.
{ If there are problems with the unit, please check the following points before contacting the technical service. Never open the unit. This may lead to electric shocks and will void the warranty. No Picture or Sound Make sure the receiver and the LCD display panel set are both connected to the power. Black Screen Remote Control Does Not Work Check whether a signal source is selected. See chapter “Select Source” Make sure the unit is connected to the power sourrce.
{Gz n Input voltage AC 100-240 V, 50/60 Hz Operating temperature 5°C to 35°C (CL47CMH10/20: 0°C to 50°C) Environment temperature -20°C to +60°C Remote control sjk } Type Infrared Battery Type R03 1.
t 24 English
