LCD Display CL-46CMH10/20 http://www.cimadigitec.com Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
This multi-LCD Display system supports high resolution and multi-screen format up to 127. So these monitors can be used individually or all together. There are various designs such as wall-mounting or stand-alone type for the best installation. You can connect the player directly to the LCD Display or network for a remote control. - Provides real-time information like weather and traffic reports, stock market information, etc.
Contents CAUTION .......................................................................................................................................2 Important Safety Instruction........................................................................................................3 Precaution .....................................................................................................................................4 Before considering as a failure ..............................................
CAUTION CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. This symbol indicates additional safety instructions in the text. This symbol indicates instructions to facilitate the operation.
Important Safety Instruction Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Do not use this apparatus near water. Clean only with a dry cloth.
Precaution Before considering as a failure Before calling for any repair, check the following and then refer to a near A/S center. “Tick” sound from the main body. If there is no problem with the screen or sound, the “tick” sound is likely to result from the cabinet lightly shrinking with change of room temperature. The sound does not affect product’s performance. No image at upper and bottom part of screen.
Unpacking and Setup Scope of Supply Please check, that the delivery is complete.
Remote Control 1 Power On/Off button 2 Numeric buttons 3 Favorite Channel Selection 4 Volume Up/Down 5 Sound Selection (Mono/Stereo/SAP) 6 Picture Mode Selection 7 Sound Mode Selection 8 Control the Cursor in the OSD Menu 9 MENU Confirmation 10 Display OSD Menu 11 Information Display 12 DVD Player Function Buttons (Available in the model that has a built-in DVD Player) 13 Temporary Sound Mute 14 DVD Player Function (Available in the model that has a built-in DVD Player) 15 Extern
Connection and start Operation Connecting the Cables You can use the Monitor set to connect camcorder and video games. Use the cinch sockets on the rear side of the unit. Connecting the AV Cable 1 Connect the AV cable to the sockets [VIDEO] and the output sockets of the external devices. Connecting the S-Video Cable 1 Connect the S-Video cable to the socket [S-VIDEO] on the rear side of the unit and the output sockets of the external devices.
Connecting to a Computer Use a 15-pin D-Sub cable or DVI-D cable to connect the LCD display panel set to the computer. 1 2 3 Plug the cable into the output socket of the graphic board. Plug the other end of the cable into the socket [RGB] or [DVI-D]. Adjust the settings of the Monitor picture corresponding to the settings for Monitor operation. See “Settings” on page 10. If the LCD display panel does not receive any signal, adjust the output of the computer.
Inserting the Batteries For the operation of the remote control 2 type R03 1.5V Size AA batteries are included in the delivery. 1 Remove the cover on the back of the remote control and insert the batteries. Notes on Handling Batteries When used properly batteries are a safe and reliable source of energy. However, when misused or not used according to the intention, they may leak. In extreme cases there is a danger of explosion or fire.
Settings Switching on 1 Press the power switch on the back of the unit. 2 Press on the remote control. This switches the unit on and it can be operated using the remote control. If it is not explicitly stated otherwise, it will be assumed that the unit and the LCD display panel set are switched on and will be operated by the remote control. By default, the unit is set to the english language. For information on how to change the on-screen language later, refer to: “Set Screen Language” on page 16.
DIP Switch Setting(No.0~69) Each Screen must have a unigue ID number by DIP switch.
DIP Switch Setting(No.70~127) Each Screen must have a unigue ID number by DIP switch.
Setting ID example for LCD display panel When connecting a number of LCD Dispay Panel through Displaychain(Link), surrounding noise may come out lower the image quality. Daisy chain can connect with LCD display panel to maximum 16EA. (by DVI) But, If you need additional connection, you must connect daisy chainusing distributer.
Connecting S-video Cable Connecting VGA Cable 14 English
Connecting the Power Cord 1 Connect the supplied power cord. AC Power Connection ▪ Don,t plug another AC power cord into extension cord. It’s a good to start a fire.The maximum current is 15A in normal extension cord. The AC power cord can be connected with Daisychain. But the maximum current must be restricted 15A. -The Model CL-46CMH10/20 can be configured serially maximum 4 SETS in USA (AC100V). -The Model CL-46CMH10/20 can be configured serially maximum 10 SETS in Europe (AC220V).
Set Screen Language The screen display text can be displayed in several languages. Use this function to set screen language. By default, the unit is set to the english language. Picture Audio Mode Brightness Mode Contrast Standard Black Level Sport Sharpness Natural Colour Mild Tint Custom Move Timer Channel Setup Option Custom OK 50 50 50 50 50 Select MENU 1 2 3 4 5 6 7 Press . Press ◄ or ► and select Setup. Press ▲ or ▼ and select OSD Language. Press .
Set Video Resolution (1280/1360) 1 2 3 4 Repeat steps from 1 to 4 in chapter “Set MISC.” Press ▲ or ▼ to select 1280/1360. Press ◄ or ► to select desired setting. Press . Select Source (Main Input) Use this function to select which signal will be displayed on the main screen, if you have connected several sources (e.g. a decoder and a roof aerial). 1 Press Main Input Video S-Video .
Remote Control Default Display 1 1 2 4 3 COM SET 4 Multi Screen Setup 3 INPUT Select input source Select input source on chosen screen ※ To adjust settings, you should press “Apply”key.
Remote Control Multi Tap 1 2 3 4 5 1 2 POWER ON/OFF u choose. GAP Set up gap between screens. 3 4 5 : Fix gap up-and-down. : Fix gap left-and-right. Multi Display Window APL Code Each unit set exchanges hte APL (Average Picture Level) information each other on same time. The controller (APC) feeds back appropriate picture level each unit set. It is automatically set up when you press the “zoom” key, and if you add optional code, choose the code value and press the “Apply”button.
Remote Control Color Tap 1 2 3 4 5 8 6 7 9 1 Brightness 6 Adjust brightness on screen. 2 Contrast 7 Adjust contrast on screen. 3 4 8 Sharpness Adjust Sharpness on screen. Freeze Image Show freeze-frame. ( But, actucly screen is running. ) Tint Adjust tint on screen. 5 Auto Geometry Setup Setup auto positioning in “RGB”mode. ( When auto geometry setup, it should be in full-screen ) Color Saturation Adjust color saturation on screen.
Remote Control Remote Tap . Remote tap is used to set up for “Multi”, “Color”, “Picture”. It can also substitute for the operation of remote control unit for additional adjustment. . Factory Mode Choose “Set” for Factory Mode.
Troubleshooting If there are problems with the unit, please check the following points before contacting the technical service. Never open the unit. This may lead to electric shocks and will void the warranty. No Picture or Sound • Make sure the receiver and the LCD display panel set are both connected to the power. Black Screen • Check whether a signal source is selected. See chapter “Select Source” on page 20 and “Select MMC” on page 20.
Technical Specifications General Input voltage AC 100-240 V, 50/60 Hz Operating temperature 0°C to 40°C Environment temperature -20°C to +60°C Remote control LCD Video Type Infrared Battery Type R03 1.5 V Size AA Pixel HD (1366 x RGB x 768) Type a-Si TFT active matrix Video system CVBS, S-Video, RGB Component Input Y/Pb/Pr PC Synchronization Component 1/2; 480i/p, 576i/p, 720p, 1080ip 30~61 kHz horizontal 56~75 Hz vertical WEB Colour display 16,7 M (true) Resolution Max.
Memo 24 English
P/N A46UM11001
