Specifications

4
INVERTER MACHINES
Professional AC / DC TIG welding Inverters
All models have the following features; high duty cycle, very high electrical efficiency, excellent welding performance with a very stable and
quiet arc & large 35-50mm connectors. The machines are robustly constructed with all internal parts mounted in such a way as to prevent
damage caused by small drops, the power components are rated to give a large safety margin for the best reliability and importantly these
machines are easy to work on and always repairable should a fault occur outside warranty. All models are built to BS EN 60974-1 are CE
marked & are RoHS compliant. These machines are generator friendly, providing a quality stable generator of at 6KVA is used. A remote
control can be fitted on request. Every machine undergoes extensive quality control & weld testing prior to dispatch to guarantee excellent
reliability.
These machines have a one year warranty.
We also guarantee to fully support these machines with spares & service for a minimum of 10 years after sale.
TIG 166i AC DC 230V & DUAL VOLTAGE 110/230V
This machine is designed for high quality AC & DC TIG welding & MMA stick welding. The machine is fitted with the following; HF to start the arc,
Infinately variable output between 10 and 160 amps, pre & post gas, slope down, torch trigger latching, true AC squarewave with balance to control
arc cleaning & penetration, digital ammeter with preset amps readout, remote socket for foot control etc. The Dual voltage 110V / 230V version has a
switch on the rear to select the appropriate voltage; this version of the machine is other wise identical apart from additional weight.
TIG 166i AC / DC 230V
TIG 166i AC / DC DUAL 110/230V
TIG 206i AC DC 230V
This machine is designed for high quality AC & DC TIG welding & MMA stick welding. The machine is fitted with the following; HF to start the arc,
Infinately variable output between 5 and 200 amps, pre & post gas, slope down, torch trigger latching, built in pulser with variable freq, base current
& pulse width, true AC squarewave with balance to control arc cleaning & penetration, digital ammeter, arc force on MMA, remote socket for foot
control etc.
TIG 206i AC/DC 230V
TIG 256T AC DC 400V three phase
This machine is designed for high quality AC & DC TIG welding & MMA stick welding. The machine is fitted with the following; HF to start the arc,
Infinately variable output between 10 and 250 amps, pre & post gas, slope down, torch trigger latching, built in pulser with variable freq, base
current & pulse width, true AC squarewave with balance to control arc cleaning & penetration, digital ammeter, arc force on MMA, remote socket
for foot control etc. We can fit a water cooler to this model on request.
TIG 256T AC/DC 3 phase
Technical spec TIG 166i AC DC TIG 166i AC DC DUAL TIG 206i AC DC TIG 256T AC DC
Supply voltage 230V 110V/230V 230V 400V three phase
Fuse (slow blow)* 13A 13A or 32A on 110V 13/16A 16A
Max (OCV) 50V 50V 60V 60V
Duty cycle 160A @ 60% 160A @ 60% 180A @ 60% 250A @ 60%
Size approx 480Lx380Hx240W 480Lx380Hx240W 390Lx280Hx150 520Lx370Hx320
Weight approx 17KG 30KG 24KG 36KG
Protection IP22 IP22 IP22 IP22
*When using with a 13A fuse above 150A MMA or 180A on TIG the fuse may blow occasionally.
A range of inverters you can buy with confidence.
200 AMPS AC DC TIG/MMA
250 AMPS AC DC TIG/MMA
160 AMPS AC DC TIG/MMA
OUR HIGH QUALITY FOOT PEDAL CAN BE FITTED TO ANY OF THESE MODELS
WATER COOLING OPTIONS ALSO AVAILABLE