Specifications

44
METERS, SHUNTS & CALIBRATION SERVICES
INDUSTRIAL ANALOGUE PANEL METERS DIN 72 (72mm square - 68mm x 68mm cut out) - (MOVING COIL)
AMPS / VOLTS SHUNT PART No. AMPMETERS + SCALES CAN BE BOUGHT SEPARATELY
READING VOLTS
READING PART No
0 - 60 VOLT DC N/A MET60V AMPMETER ONLY MET000A
0 - 100 VOLT DC N/A MET100V SCALES SC_ _ _ _A
0 - 300 AMP DC 60mV MET300A PLEASE FILL IN THE
0 - 400 AMP DC 60mV MET400A REST OF THE PART No.
0 - 500 AMP DC 60mV MET500A WITH THE SCALE
0 - 600 AMP DC 60mV MET600A AMPERAGE REQUIRED.
0 - 1000 AMP DC 60mV MET1000A (300, 400, 500, 600,
0 - 1500 AMP DC 60mV MET1500A 1000, OR 1500)
NEW
0 – 400 AMP AC MET400AC (FOR USE WITH CURRENT TRANSFORMER)
400A AC CURRENT TRAN METTRAN
DIGITAL PANEL METERS + METER KITS. Suitable for all machines
These are amps and volts L.E.D. display PCBs & kits which will calibrate to almost any shunt.
The panel meters come with wiring information, & connector.
The meter kits are as the panel meters, but come already wired up in a loom complete with transformer, which enables you to run the meter off 110v or
230v (as standard). The advantages of these digital meters over conventional analogue meters include; a longer life span, (no sticking needles, etc.),
not susceptible to grinding dust, more accurate readings which are displayed clearer and can be read from greater distances, and in kit form, they are
extremely easy to fit. There are different versions available, a dual amps & volts display, a single display which you can switch between amps and volts
& AC DC switchable versions. The displays are mounted onto the front lenses which are 3mm thick for strength, the kits mount with 2 screws from the
front lenses onto the front panel of the machine. The front lenses are large enough to cover most cut outs both round and square up to 76mm, making a
professional job of replacing old meters.
Size of lenses Single display 95mm x 95mm Dual display 98 x 120mm
TYPE DISPLAY PART No.
DIGITAL PANEL METER ONLY SINGLE DISPLAY DC AMPS & VOLTS (SWITCHABLE) DPM100
DIGITAL PANEL METER ONLY DUAL DISPLAY DC AMPS + VOLTS DPM200
DIGITAL METER KIT DUAL DISPLAY DC AMPS + VOLTS DPM200K
DIGITAL METER KIT SINGLE DISPLAY DC AMPS & VOLTS. (SWITCHABLE) DPM100K
DIGITAL METER KIT SINGLE DISPLAY AC/DC AMPS DPM103K
DIGITAL METER KIT SINGLE DISPLAY AC/DC VOLTS DPM104K
A + V DIGITAL METER KIT FOR OERLIKON F32/F34/M308C, WEST, KAMANCHI MACHINES DPMF3234
SHUNTS - Shunts for above ammeters or as replacements.
AMPERAGE SHUNT VOLTAGE PART No.
400A 60mV CALIBRATED SH40060
600A 60mV CALIBRATED SH60060
1000A 60mV CALIBRATED SH100060
CALIBRATION SERVICES – Traceable to National Standards laboratories
TYPE
Recommended freq Part No.
STERLING VALIDATOR RECALIBRATION 6 MONTHS CAL001
STERLING VALIDATOR C/W TACO RECALIBRATION 6 MONTHS CAL002
TECHNICAL ARC CALIBRATOR 6 MONTHS CAL003
TECHNICAL ARC CALIBRATOR C/W TACO 6 MONTHS CAL004
STERLING CALIMETER - VARIOUS 6 MONTHS CAL005
TECHNICAL ARC ANALOGUE METER BOX - VARIOUS 12 MONTHS CAL006
TECHNICAL ARC CALIBOX - VARIOUS 12 MONTHS CAL007
WE OFFER A REPAIR SERVICE ON MOST TEST EQUIPMENT INCLUDING, STERLING VALIDATOR, ANALOGUE AND DIGITAL METER BOXES, MULTIMETERS,
CLAMPMETERS, INSULATION TESTERS, TACOMETERS, ETC.
Other shunts & meters available on request
Calibration equipment available;
calibox`s, meterbox`s, meters, load
banks, see page 1.