Specifications

36
WATERPUMPS & FITTINGS.
Top quality long life rotary water pumps as used by many of the leading manufacturers & fitted to our water coolers
The pump head and impeller is made from brass & the shaft is stainless steel, the head can be rotated by 90 degree increments so the in &
out port position can be changed to suit the machine, the ports are 8mm but 6mm hose is a good tight fit.
We supply this pump with a capacitor and wiring information.
WATER PUMP 110 VOLT AC WATER PUMP COMPLETE. WAP1101
AC SUPPLY 2.5A
WATER PUMP 230 VOLT AC WATER PUMP COMPLETE WAP2301
AC SUPPLY 1.1 Amps
WATER PUMP 400 VOLT AC WATER PUMP COMPLETE WAP4001
AC SUPPLY 0.6 Amps
APPROX SIZE; L - 200mm, W - 110mm, H - 110mm, all pumps have slotted feet for easy mounting.
The above water pumps can be fitted with a 150mm diameter fan blade as shown add FB to end of part
number, e.g. WAP2301FB
VIBRATING WATERPUMP (Electromagnetic solenoid type) PART No: WAP2302
230 V AC pump c/w water fittings
Fits virtually all machines that use this type of pump. This will also fit Migatronic machines
although is a little bigger than the original. Size approx: Length = 200MM (excluding water fittings) X 110MM square
FLOW SWITCH (adjustable) PART No: FLO11
Suitable for water cooled systems on migs, tigs and plasma cutters.
Adjustable flow switch point 0.5-3.3 L/MIN. 3/8 BSP male inlet & 3/8 BSP female outlet. (Made from stainless
steel).
Max. current 1 amp (resistive) Max. voltage: 100V Max. power: 30W (resistive) / 15VA
FLOW SWITCH (fixed) PART No: FLO12
Suitable for water cooled systems on migs, tigs and plasma cutters (requires mounting vertically)
Fixed switch point of 0.5 L/MIN. 8mm or 6mm hose tails for inlet and outlet. Size: approx 260mm x 32mm
Max. current 1 amp (resistive) Max. voltage: 100V AC/DC Max. power: 15W, supplied with fittings for 6mm hose.
FLOW SWITCH TRIAC CIRCUIT PART No: FLO13
The above flow switches can only switch low power; this buffer circuit can be wired with the flow switches for switching
AC power up to 5 Amps for switching contactor circuits etc.
FEMALE PANEL MOUNT SNAP FITTING (RED) PART No: WA0001R
FEMALE PANEL MOUNT SNAP FITTING (BLUE) PART No: WA0001B
Very High quality snap fittings with an 8mm barbed tail these give a good tight fit on to 6mm hose & also work with 8mm hose
MALE PIPE SNAP FITTING – PART No: WA0002
Suitable for water pipes with an i.d of 5mm.
RADIATOR FOR WATER COOLERS PART No RAD600
Standard radiator with 8mm in and out for 8mm hose or a good tight fit on 6mm hose.
Size 235 x 205 x 70mm (excluding termination of hose)
JUBILEE CLIPS 9.5mm – 12mm (in pks of 10) PART No JUB9512
Top quality, to fit 6mm hose much better than `O` clips, recommended for all water cooling applications.
HOSE CLEAR UNREINFORCED PVC PART No GAS3005
Clear PVC hose suitable for connecting to euro blocks, etc. 5mm ID, 8mm OD, 1.5mm wall.
HOSE PVC ¼ REINFORCED 10 bar working pressure PART No GAS3006
Quality British made gas & water hose suitable for coolers, intercons etc 6mm ID 11.5mm OD
This is the very flexible type so it’s easier to fit connectors, it will even fit onto 8 mm tails.
HOSE BLACK RUBBER ¼ REINFORCED 20 bar PART No GAS3006R
Robust rubber antistatic hose suitable for gas & water etc
OTHER WATER FITTINGS, BULKHEAD FITTINGS AND PRESSURE SWITCH ARE AVAILABLE. SEE PAGE 35