Specifications

32
FANS AND FAN MOTORS
Industrial standard panel fans - used by all manufacturers.
VOLTAGE TYPE SIZE PART No
230 VAC square 120MM X 120MM x 38MM FAN230120
110 VAC square 120MM X 120MM x 38MM FAN110120
230 VAC Oval 150MM X 172MM X 51MM FAN230150
12 VDC square 92MM X 92MM X 25MM FAN129225
12 VDC square 120MM X 120MM X 38MM FAN1212038
12 VDC square 120MM X 120MM X 25MM FAN1212025
24VDC square 92MM X 92MM X 25MM FAN249225
24VDC square 92MM X 92MM X 38MM FAN249238
24 VDC square 120MM X 120MM X 25MM FAN2412025
24 VDC square 120MM X 120MM X 38MM FAN2412038
24VDC round 172MM X 51MM FAN24172R
24VDC oval 150MM X 172MM X 51MM FAN24172
FAN GUARD FOR 120mm square fans FAN120GD
Industrial standard fan motors
This style of fan motor is used by all major manufacturers. A fan blade is secured by one screw with
4 locating pips on a plastic flange. These fan motors can be mounted either on the back panel via
three screws or onto a bracket with two screws underneath the motor.
The 35W version uses a capacitor to improve efficiency which is supplied.
Sizes exclude fixings & capacitor, L size is total length from fan blade fixing to back of motor.
Blades to suit are listed below; a smaller blade than stated below can be fitted to any of the motors,
but not a larger blade.
SIZE WATTAGE VOLTAGE PART No
84mm x 84mm x 86mmL 10W 230V FAN7210
84mm x 84mm x 106mmL 20W 230V FAN9220
84mm x 84mm x 112mmL 35W 230V FAN11235
Fan blades for above fan motors
TYPE SIZE PART No
BLOWS AWAY FROM MOTOR 6” (150mm) DESIGNED TO FIT THE 10W FAN MOTOR. FAN0601
BLOWS AWAY FROM MOTOR 10” (250mm) DESIGNED TO FIT THE 10W OR 20W FAN MOTOR. FAN1001
BLOWS AWAY FROM MOTOR 12” (300mm) DESIGNED TO FIT THE 20W FAN MOTOR. FAN1202
BLOWS AWAY FROM MOTOR 14’’ (350mm) DESIGNED TO FIT THE 35W FAN MOTOR. FAN3501
BLOWS AIR OVER MOTOR 10” (250mm) FAN1002
Industrial axial fans (motor & blade assy complete)
These are used by many manufacturers including Kemppi, Murex, Esab, Sterling, Butters, etc.
Sizes are max diameter x overall depth. All are supplied with a capacitor & wiring diagram.
Mounting is with 4 screws at rear on 41mm x 41mm square fixing centres.
Size Details
PART No.
200mm dia x 60MM 230Vac (HIGH SPEED). FAN200230
250mm dia x 70mm 230VacMAX FLOW 950CFM (HIGH SPEED) FAN250230
300mm dia x 95mm 230Vac MAX FLOW 1500CFM (HIGH SPEED) FAN300230
350mm dia x 95mm 230Vac MAX FLOW: 1800CFM (HIGH SPEED) FAN350230
400mm dia x 96mm 230Vac MAX FLOW: 2100CFM (lower speed) FAN400230
Industrial backward curved fans ESAB STYLE (motor & blade assy complete)
Sizes are max diameter x overall height. These are supplied with a capacitor & wiring diagram.
Mounting is with 4 screws at the bottom on 41mm x 41mm square fixing centres.
Details Size
PART No.
FAN FOR ESAB / MUREX 230Vac 230MM X 80MM FANES230
POWERSOURCES
(LAG315 ETC) PLEASE CHECK SIZE BEFORE ORDERING
OTHER SIZES OF THIS FAN ARE ALSO STOCKED FOR LARGER ESABS ETC
Next day delivery on all spares
Round type
Square type
Oval type
35W 20W 10W
Other fans are also available