Specifications

24
WIRE FEED SYSTEMS & SPARES
Standard Range – Superior Swiss made drive systems
(F2, F2G, F4, F4G Technical arc feeders) Also Murex, Sterling, Portamig, Arctec, Camarc, Esab, Oerlikon, Saf, etc
ITEM PART PART No
2 ROLL WIRE FEED SYSTEM (c/w roller) (FEEDPLATE 2) FEEDSYS200
2 ROLL GEARED WIRE FEED SYSTEM (c/w roller) (FEEDPLATE2G) FEEDSYS200G
4 ROLL WIRE FEED SYSTEM (c/w rollers) (FEEDPLATE4) FEEDSYS400
4 ROLL GEARED WIRE FEED SYSTEM (c/w rollers) (GEARED TOP ROLLERS) FEEDSYS400G
1. 2 ROLL PLATE ONLY NO PARTS FEEDSYS01
2. 4 ROLL PLATE ONLY NO PARTS FEEDSYS02
PART No.
RC PRESSURE ARM COMPLETE (NON GEARED) FEEDSYSRC TWO ROLL NON GEARED FEED SYSTEM
0D PRESSURE ARM COMPLETE (GEARED) FEEDSYS0D
4. PRESSURE DEVICE FEEDSYS04
5. BEARING PRESSURE ROLL (FOR NON GEARED FEED PLATES) FEEDSYS05
7. LOCATING PIN (PRESSURE DEVICE) FEEDSYS07
8. PRESSURE ARM ONLY FEEDSYS08
9. AXLE SHAFT - PRESSURE ROLL (NON GEARED) FEEDSYS09
10. SPACER FEEDSYS10
11. NUT FEEDSYS11
12. LOCATING PIN (PRESSURE ARM) FEEDSYS12
13. CIRCLIP FEEDSYS13
14. SPACER TUBE (PRESSURE ARM) FEEDSYS14
15. SPRING (PRESSURE ARM) FEEDSYS15
16. GEARED ADAPTER FEEDSYS16
17. AXLE SHAFT - PRESSURE ROLL (GEARED) FEEDSYS17
CIRCLIP (PRESSURE ROLL AXLE) FEEDSYS18
20. PLAIN PRESSURE ROLL (FOR GEARED PRESSURE ARMS) FEEDSYS20
20. KNURLED PRESSURE ROLL (FOR GEARED PRESSURE ARMS) FEEDSYS20K
21. INLET GUIDE FEEDSYS21 TWO ROLL GEARED FEED SYSTEM
22. INTERMEDIATE GUIDE FEEDSYS22
23. GEARED ADAPTER (FEED ROLL) FEEDSYS23
25. LOCATING SCREW (FEED ROLL) FEEDSYS25
26. AXLE SHAFT (GEARED ADAPTER / FEED ROLL) FEEDSYS26
27. WASHER FEEDSYS27
28. RETAINING SCREW FEEDSYS28
29. MAIN DRIVE GEAR FEEDSYS29
30. SCREW FEEDSYS30
32. INSULATOR KIT FEEDSYS32
FOUR ROLL FEED SYSTEM
WIRE FEED MOTORS TO FIT THESE FEED
SYSTEMS ON PAGE 30
WIRE FEED ROLLERS
– TO FIT THE ABOVE FEED SYSTEMS
To fit our F2-F4 range of feeders & Murex, Sterling, Portamig, Arctec, Camarc, Esab, Oerlikon, Saf, etc
TYPE GROOVE SIZE PART No
2 ROLL V GROOVE 0.6MM - 0.8MM FEED2V0608
2 ROLL V GROOVE 0.8MM - 1.0MM FEED2V0810
2 ROLL V GROOVE 1.0MM - 1.2MM FEED2V1012
2 ROLL U GROOVE 1.0MM - 1.2MM FEED2U1012
2 ROLL U GROOVE 1.2MM - 1.6MM FEED2U1216
2 ROLL KNURLED 1.0/1.2MM - 1.4/1.6MM FEED2K1016
4 ROLL / 2 ROLL GEARED V GROOVE 0.6MM - 0.8MM FEED4V0608
4 ROLL / 2 ROLL GEARED V GROOVE 0.8MM - 1.0MM FEED4V0810
4 ROLL / 2 ROLL GEARED V GROOVE 1.0MM - 1.2MM FEED4V1012
4 ROLL / 2 ROLL GEARED V GROOVE 1.2MM - 1.6MM FEED4V1216
4 ROLL / 2 ROLL GEARED U GROOVE 1.0MM - 1.2MM FEED4U1012
4 ROLL / 2 ROLL GEARED U GROOVE 1.2MM - 1.6MM FEED4U1216
4 ROLL / 2 ROLL GEARED U GROOVE 2.4MM - 3.2MM FEED4U2432
4 ROLL / 2 ROLL GEARED KNURLED 1.0 / 1.2MM - 1.4 / 1.6MM FEED4K1016
4 ROLL / 2 ROLL GEARED KNURLED 1.4 / 1.6MM - 2.0 / 2.4MM FEED4K1424
4 ROLL / 2 ROLL GEARED KNURLED 2.8 / 3.2MM FEED4K2832
U GROOVED ROLLERS ARE FOR DRIVING SOFT ALUMINUM WIRE. V GROOVED ROLLERS ARE FOR DRIVING HARD WIRE. .KNURLED ROLLERS ARE FOR DRIVING FLUX CORED WIRE.
2 ROLL GEARED / 4 ROLL ROLLER
2 ROLL NON GEARED
Next day delivery on all
spares