Specifications
15
WIRE FEED UNITS - ARC VOLTAGE
TECFEED 350i SUITCASE WIRE FEED UNIT – heavy duty arc voltage feeder
The TECFEED 350i feed is robustly constructed in a reinforced moulded case to give a fully enclosed wire feed unit which is well sealed against the
elements. Due to rugged construction this is ideal for all site welding in harsh environments & also are very portable. This wire feed unit is designed to
run off virtually any constant current or constant voltage powersource, including MMA, TIG, MIG and engine driven type DC powersources. The wire
feed unit requires no additional supplies, only welding cable connections, and can run positive or negative polarity, giving very good performances with
solid or flux cored wires.
• Arc voltage sensing wire speed control for arc stability,
• 4 roll drive system for the best feeding of wire
• Burnback control,
• Normal trigger, and trigger latch functions,
• Wire inch
• Contactor and gas valve fitted as standard,
• Takes a 15kg reel of wire
• Welding current range – 50 to 350 amps
• Will work with input voltages of between 20 – 110V, (Welding down to 15V)
Optional Amps and voltage digital readout, and optional flow gauge can be fitted. Size approx L=560mm, W210=mm, H=420mm, 10KG approx
TECFEED 350i SUITCASE COMPACT WIRE FEED UNIT – heavy duty arc voltage feeder
The TECFEED 350i compact is robustly constructed in a reinforced moulded case to give a fully enclosed wire feed unit which is well sealed against the elements. Due to
rugged construction this is ideal for all site welding in harsh environments & also are very portable. This wire feed unit is designed to run off virtually any constant current or
constant voltage powersource, including MMA, TIG, MIG and engine driven type DC powersources. The wire feed unit requires no additional supplies, only welding cable
connections, and can run positive or negative polarity, giving very good performances with solid or flux cored wires.
• Arc voltage sensing wire speed control for arc stability,
• 4 roll drive system for the best feeding of wire
• Burnback control,
• Normal trigger, and trigger latch functions
• Contactor and gas valve fitted as standard
• Takes a 5kg reel of wire
• Welding current range – 50 to 350 amps
• Will work with input voltages of between 20 – 110V, (Welding down to 15V)
Optional Amps and voltage digital readout, and optional flow gauge can be fitted.
Size approx L=460mm, W170=mm, H=360mm, 8KG approx
F40i WIRE FEED UNIT- heavy duty arc voltage feeder
Four roll drive wire feed unit designed to run off virtually any constant current or constant voltage powersource, including MMA, TIG, MIG and
engine driven type DC powersources. The F40 inline wire feed unit requires no additional supplies, only welding cable connections, and can run
positive or negative polarity, giving very good performances with solid or flux cored wires. Features include:-
• Arc voltage sensing wire speed control for arc stability,
• Burnback control,
• Normal trigger, and trigger latch functions,
• Wire inch,
• Contactor and gas valve fitted,
• Takes a 15kg reel of wire,
• Welding current range – 50 to 300 amps
• Will work with input voltages of between 20 – 110V, (Welding down to 15V)
Size approx L=570mm, W=220mm, H=400mm Weight: 15KG
Picture shows casters fitted instead of feet, this option on any feeder is an extra £10
F120i ARC VOLTAGE WIRE FEED UNIT – light duty arc voltage feeder
Two roll drive wire feed unit designed to run off virtually any constant current or constant voltage powersource, including MMA, TIG, MIG and
engine driven type DC powersources. The F120i inline wire feed unit requires no additional supplies, only welding cable connections, and can run
positive or negative polarity, giving very good performances with solid or flux cored wires.
Arc voltage sensing wire speed control for arc stability, contactor and gas valve fitted,
takes a 15kg reel of wire, welding current range – 50 to 200 amps; (200A @ 40% duty cycle)
Will work with input voltages of between 21 – 100V, (Welding down to 15V)
Dimensions: L=550mm, W=235mm, H=330mm
Weight: 14KG
F2000i SITE WIRE FEED UNIT – light duty arc voltage feeder
Light weight, very small and compact wire feed unit. Designed for site work, it will run off virtually any constant current or constant voltage powersource, including MMA, TIG,
MIG and engine driven type DC powersources. The F2000i inline wire feed unit requires no additional supplies, only welding cable connections, and can run positive or
negative polarity, giving very good performances with solid or flux cored wires.
Arc voltage sensing wire speed control for arc stability, Contactor and gas valve fitted,
takes standard 5kg reels of wire, Burnback control, 2 roll geared feed system.
Welding current range – 40 to 200 amps (200A @ 40% duty cycle)
Will work with input voltages of between 20 – 110V (Welding down to 15V)
Dimensions: L=500mm, W=185mm, H=330mm Approx Weight: 7KG
15KG spools
15KG spools
15KG spools
5KG spools
TECFEED 350i
TECFEED 350iC
5KG spools
F40i
F120i
F2000i