Specifications
11
WATERCOOLERS
XC600 WATERCOOLER
The XC600 water cooler is a very compact and robust unit & is fitted with a long life rotary pump. The small footprint makes it ideal for fitting
onto the bottle carrier at the back of a power source or free standing. There are three versions, a 110 volt, a 230 volt, and a 400 volt. They
have 3/8 BSP brass fittings for the water connections as standard, or snap fittings if requested. This unit is suitable for most welding
applications up to 600 amps. For an extra £30.00 an internal flow switch can be fitted to interface with the power source to prevent damage
occurring to the welding torch in the event of a flow problem. For the option of an internal flow switch fitted, please add FSW to the end of the
relevant part number shown below.
Technical specifications
Electrical
XC600110 110V +/- 10%, Freq. 50/60Hz, 3.0A
XC600230 230V +/- 10%, Freq. 50/60Hz, 1.4A
XC600400 400V +/- 10%, Freq. 50/60Hz, 1.0A
Performance – All models
Flow rates Max 10 litres/min (typ. 2 – 3 litres/min through torch).
Pressure - Typ. 2 – 3 bar
Cooling capacity - 900 watts / 21`C rise above ambient.
Typical application - MIG to 600A. TIG to 400A. Res up to 45KVA.
Approx. Dimensions - 245mm Length, 210mm Width, 430mm Height.
TYPE PART No.
110 VOLT WATERCOOLER XC600110
230 VOLT WATERCOOLER XC600230
400 VOLT WATERCOOLER XC600400
WATERCOOLERS IN BLACK, PLEASE ADD `BLACK` TO THE END OF THE PART NUMBER
WATERCOOLER TROLLEY (Industrial size)
This unique trolley is designed to turn an air-cooled machine into a neat water-cooled package.
The water cooling is built into the underside of the chassis with snap fittings & a on off switch on the front. This robust design
can cope with 100’s of different types of machines. It is designed to carry a full size bottle, a power source, and a wire feed
unit or TIG HF box & is available in 110V, 230V and 400V. The supply cable is at the rear & is ideally placed for connecting
into the rear of a power source. The top tray has adjustable mounting heights.
This trolley can be bought without the water cooler system for air cooled applications.
SPECIFICATION
Technical specifications
Flow rates Max 10 litres / min (typ. 2 – 3 litres / min). Electrical
Pressure - Typ. 2 – 3 bar WT110 110V +/- 10%, 50/60Hz, 3.0A
Cooling capacity - 900 watts / 21`C rise above ambient. WT230 230V +/- 10%, 50/60Hz, 1.4A
Typical application - MIG to 600A. TIG to 400A. Res up to 45KVA. WT400 400V +/- 10%, 50/60Hz, 1.0A
Size approx 950mm L x 400mm x 1050mm (inc handles)
MODEL DESCRIPTION PART No.
WT110 Trolley with 110V built in water cooler WT110
WT230 Trolley with 230V built in water cooler WT230
WT400 Trolley with 400V built in water cooler WT400
TROLLEY ONLY Trolley with NO built in water cooler WT001
An up rated, heavy duty version of the water cooler trolley is available for TIG machines over 400A ETC.
Please add HD to the above part numbers for the trolley you require, and add £40.00 to the price.
SPECIFICATIONS for the heavy duty water cooler trolley
Performance – All HD models Technical specifications
Flow rates Max 10 litres / min (typ. 2 – 3 litres / min). Electrical
Pressure - Typ. 2 – 3 bar WT110 110V +/- 10%, 50/60Hz, 3.2A
Cooling capacity - 1200 watts / 21`C rise above ambient. WT230 230V +/- 10%, 50/60Hz, 1.5A
Typical application - 700A MIGs / 500A AC/DC TIGs WT400 400V +/- 10%, 50/60Hz, 1.1A
All our water coolers are manufactured to comply with BS EN60974-2. For safety reasons do not accept anything less.
Available in black or
yellow, please state
when ordering
Plugs can be fitted to any
of the coolers to suit the
power source auxiliary
socket.
Max power source size 670mm L x 360mm W x 730mm H Ideal for Miller XMT, Phoenix 456, Maxstar, Lincoln etc
On three phase 400V machines 400V coolers have the advantage of easy connecting without worrying about the rating of the supply