CONTENTS A-Z CONTENTS Welding equipment & auxiliary welding equipment Pages 1-15 Torches MIG, TIG, PLASMA Pages 16-23 Wirefeed & Euro adaptor parts Pages 24-31 Machine parts & other spares Pages 32-45 Technical Services Pages 46 PCB repairs & service exchange Pages 47-59 Terms & conditions & important information Pages 59-60 A-I AC/DC clamp meter 1 AC/DC Welding Inverters 4 Add on TIG boxes 8 Air regulators & fittings 35 Amphenol connectors 39 Analogue panel meters 44 Arc voltage controller (
1 CALIBRATION & TEST EQUIPMENT LOAD BANK 400 The most portable & lightweight load bank available This is the lightest and most compact 400A load bank available. Built using a unique design means the total weight is only 8.5kgs making it truly ‘Engineer friendly ‘ The load bank is fitted with 4 heavy duty push switches, the value of each is selected to give maximum coverage of the load range and gives you a possible 14 different load settings.
2 INVERTER MACHINES Professional MMA welding Inverters All models have the following features; high duty cycle, very high electrical efficiency, excellent welding performance with a very stable and quiet arc & large 35-50mm connectors.
3 INVERTER MACHINES Professional DC TIG welding Inverters All models have the following features; high duty cycle, very high electrical efficiency, all have excellent welding performance with a very stable and quiet arc & large 35-50mm connectors.
4 INVERTER MACHINES Professional AC / DC TIG welding Inverters All models have the following features; high duty cycle, very high electrical efficiency, excellent welding performance with a very stable and quiet arc & large 35-50mm connectors.
5 INVERTER MACHINES Professional PLASMA cutter Inverters All models have the following features; high duty cycle, very high electrical efficiency, excellent cutting performance & large 35-50mm connector for the earth.
6 FOOTPEDALS EXTENDED RANGE We have been manufacturing foot pedals for over 15 years. Our range of pedals are used by major manufacturers & are renowned for their smooth operation & excellent durability. Now we have improved these even further, we have a unique design using a long life potentiometer which has virtually zero mechanical stress & uses no gears, racks or timing pulleys. The result is we achieve super smooth precision control from minimum to maximum current with no lumpy feeling.
7 FOOTPEDALS - continued EXTENDED RANGE SAF NERTABLOCK 260 ETC. FOOTPEDAL C/W 10 PIN AMPHENOL + 3 PIN JACK PLUG SAF TIGMATE 400 ETC.
8 TIG BOXES TIG - START180i HF The TIG – START 180i HF is a light duty TIG box which runs off the arc voltage of any DC constant current power source including MMA, inverter, and engine driven machines. No additional power supply is needed. It completely transforms scratch start TIG to provide basic TIG welding functions for any of the above type of machines. No more gas valve torches, wasted gas, contaminated tungsten’s etc.
9 TIG COLD WIRE FEEDERS This unit is designed as an easy add on for all TIG welding machines & torches for automatic systems or hand welding of ferrous & non ferrous materials.
10 ARC LENGTH SYSTEM ALS2000 (AVC) Industrial quality British made automatic arc length control system for DC or AC TIG welding or Plasma welding Ideal for use with a column & boom, positioners, rotators etc NEW Remote controller can be made to give many different functions including arc length, torch inch up & down, welding amps, start / stop etc Linear actuator Has 150mm travel as standard smaller 100mm or 50mm travel versions are also available.
11 WATERCOOLERS XC600 WATERCOOLER The XC600 water cooler is a very compact and robust unit & is fitted with a long life rotary pump. The small footprint makes it ideal for fitting onto the bottle carrier at the back of a power source or free standing. There are three versions, a 110 volt, a 230 volt, and a 400 volt. They have 3/8 BSP brass fittings for the water connections as standard, or snap fittings if requested. This unit is suitable for most welding applications up to 600 amps. For an extra £30.
12 TURNTABLES – PROFESSIONAL WELDING POSITIONERS The TT600, TT1000 and TT3000 are the ideal solution for producing a circular weld, fast and accurately, or for accurately & rapidly positioning the work piece for welding, etc. Optional quick release self centre chuck Accepts from 5mm to 210mm internal or external clamping. Comes with 2 types of jaws As standard the TT600, TT1000 & TT3000 are supplied with a foot switch to stop & start the rotation.
13 SPOOL ON GUN SYSTEMS SGS240 spool gun system A ready to weld system which fits all machines with a Euro connection in seconds Unique design means no separate control box or mains supply is needed just plug in & weld.
14 WIRE FEED UNITS UNIVERSAL OPEN SPOOL TYPE WIRE FEED UNITS MODEL FEED SYSTEM VOLTAGE PART No F2 2 ROLL DRIVE 24 V ~ 42 V ~ MULTI VOLTAGE WFU224 WFU242 WFU2M F2G 2 ROLL GEARED 24 V ~ 42 V ~ MULTI VOLTAGE WFU2G24 WFU2G42 WFU2GM F4 4 ROLL DRIVE 24 V ~ 42 V ~ MULTI VOLTAGE WFU424 WFU442 WFU4M F4G 4 ROLL DRIVE 24 V ~ 42 V ~ MULTI VOLTAGE WFU4G24 WFU4G42 WFU4GM STANDARD RANGE - SWISS MADE WIRE DRIVE SYSTEM.
15 WIRE FEED UNITS - ARC VOLTAGE TECFEED 350i SUITCASE WIRE FEED UNIT – heavy duty arc voltage feeder The TECFEED 350i feed is robustly constructed in a reinforced moulded case to give a fully enclosed wire feed unit which is well sealed against the elements. Due to rugged construction this is ideal for all site welding in harsh environments & also are very portable.
16 TORCHES MIG & TIG MIG Torch range (premium quality) All are fitted with high temperature rated USA made power cable which has spring supports at torch & Euro, spring loaded trigger pins, high temp thermoplastic handle with ball joint at cable entry, full set of consumables including 2 spare tips, liner factory fitted, the 360A has HD M8 consumables, all have Binzel compatible parts.
17 PLASMA CUTTING TORCHES TRAFIMET CB50 ERGO PLASMA TORCH The Trafimet CB50 torch is a high quality very popular low cost torch which can be fitted to most machines with HF start up to 50 amps. The low cost & easy availability of parts makes it an ideal choice for replacing torches on many different machines.This torch has 100% compatible consumables with the Cebora Prof 50 type torch & is fitted to many different machines including the TECARC 46i & 56i.
18 PLASMA CUTTING TORCHES TRAFIMET CB70 ERGO PLASMA TORCH The Trafimet CB70 torch is a high quality low cost torch which can be fitted to most machines with HF start up to 70 amps. The low cost & easy availability of parts makes it an ideal choice for replacing torches on many different machines. This torch has 100% compatible consumables with the Cebora Prof 70 type torch & is used by many different manufacturers; we fit this torch to our TECARC 76i plasma.
19 PLASMA CUTTING TORCHES TRAFIMET S45 ERGO PLASMA TORCH (ALSO same as S25) The Trafimet S45 torch is a high quality Non HF torch which can be fitted to most machines with air start up to 45Amps. The low cost & easy availability of parts makes it an ideal choice for replacing torches on many different machines. The S45 torch has a compact head & small consumables so is ideal for more delicate work.
20 PLASMA CUTTING TORCHES TRAFIMET S75 ERGO PLASMA TORCH The Trafimet S75 torch is a high quality Non HF torch which can be fitted to most machines with air start up to 75Amps. The low cost & easy availability of parts makes it an ideal choice for replacing torches on many different machines. This torch is particularly suitable for some Hypertherm & Thermadyne machines.
21 PLASMA CUTTING TORCHES TRAFIMET A81 ERGO PLASMA TORCH The Trafimet A81 torch is a high quality HF torch which can be fitted to most machines with HF start up to 80 Amps. The low cost & easy availability of parts makes it an ideal choice for replacing torches on many different machines. This is fitted to our TECARC 86i plasma.
22 PLASMA CUTTING TORCHES TRAFIMET A101 ERGO PLASMA TORCH The Trafimet A101 torch is a workhorse of a torch & is fitted to 1000s of machines. This is a quality HF start torch & can be fitted to most HF machines up to 100 Amps. The low cost & easy availability of parts makes it an ideal choice. This is fitted to our many of our TECARC plasma machines.
23 PLASMA CUTTING TORCHES TRAFIMET A141 ERGO PLASMA TORCH The Trafimet A141 torch is a real workhorse of a torch & is fitted to 1000s of machines. This is a quality HF start torch & can be fitted to most HF machines up to 140 Amps. The low cost & easy availability of parts makes it an ideal choice. This is fitted to our TECARC plasma machines over 100A.
24 WIRE FEED SYSTEMS & SPARES Standard Range – Superior Swiss made drive systems (F2, F2G, F4, F4G Technical arc feeders) Also Murex, Sterling, Portamig, Arctec, Camarc, Esab, Oerlikon, Saf, etc ITEM 1. 2. RC 0D 4. 5. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 20. 20. 21. 22. 23. 25. 26. 27. 28. 29. 30. 32.
25 WIRE FEED SYSTEMS & SPARES ECO range (F20, F20G, F40, F40G Technical arc feeders) Also Thermal arc, Hobart Oerlikon etc 2 ROLL WIREFEED SYSTEMS & SPARES ITEM A) B) C) D) DESCRIPTION -COMPLETE FEED PLATES 2 ROLL FEED SYSTEM NON GEARED LIGHT DUTY INC ALL PARTS & ROLLERS (PLASTIC PLATE) 2 ROLL FEED SYSTEM GEARED LIGHT DUTY INC ALL PARTS & ROLLS (PLASTIC PLATE) 2 ROLL FEED SYSTEM NON GEARED MEDIUM DUTY INC ALL PARTS & ROLLS (CAST ALI PLATE) 2 ROLL FEED SYSTEM GEARED MEDIUM DUTY INC ALL PARTS & ROLLERS (CAS
26 WIRE FEED SYSTEMS & SPARES LIGHT DUTY LOW COST EASY FITTING WIRE FEED SYSTEMS – WITH EURO ADAPTOR ECO RANGE (30mm rollers) DESCRIPTION - COMPLETE FEED PLATE AND EURO ASSEMBLY 2 ROLL DRIVE SYSTEM C/W ALL ROLLERS GEARS & EURO ETC 2 ROLL DRIVE SYSTEM C/W ALL ROLLERS GEARS & EURO & 24V MOTOR PART NO FES1200 FES1201 (EVERYTHING MOUNTS VIA THE EURO ONTO A FRONT PANEL) ITEM 1) 2) 6) 9) 10) 11) 13) 14) 14B) 15) 16) 17) 18) 19) 20) 21) 23) 24) 25) 26) 27) 28) 29) 30) DESCRIPTION -SPARES FEEDPLATE ONLY NO PA
27 WIRE FEED SYSTEMS & SPARES HEAVY DUTY 4 ROLL FEED SYSTEM ECO range (40mm rollers) USED BY TECARC, NEWARC, LINCOLN, BESTER, HOBART, (40MM FEED ROLLERS) DESCRIPTION - COMPLETE FEED PLATES 4 ROLL GEARED ITEM 1) 2) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 25) 28) 29) (METAL PLATE) DRIVE SYSTEM C/W ALL ROLLERS AND GEARS ETC (NO MOTOR) DESCRIPTION -SPARES FEED PLATE WITHOUT GEARS/ROLLERS ETC.
28 WIREFEED ROLLERS, GEARS & BEARINGS MISC. CAMARC 2S / 2FC-2 ETC - Pair of top and bottom rollers complete with nylon gears. Rollers fixed onto gears with screws. Type size Part no V GROOVE FOR HARD WIRE V GROOVE FOR HARD WIRE V GROOVE FOR HARD WIRE V GROOVE FOR HARD WIRE V GROOVE FOR HARD WIRE U GROOVE FOR SOFT WIRE U GROOVE FOR SOFT WIRE U GROOVE FOR SOFT WIRE KNURLED FOR TUBULAR WIRE KNURLED FOR TUBULAR WIRE KNURLED FOR TUBULAR WIRE 0.6MM 0.8MM 1.0MM 1.2MM 1.6MM 1.0MM 1.2MM 1.6MM 1.0MM 1.2MM 1.
29 WIREFEED ROLLERS, GEARS AND BEARINGS MISC. FRONIUS STYLE ROLLERS & GEARS– Under development available spring 2010 New low prices coming on Fronius style rollers KEMPPI / NEXUS / BOC STYLE ROLLERS / GEARS – 32MM diameter NEXUS / BOC / KEMPPI K200 / K400 / K550 / PRO / FASTMIG / KEMPOWELD / KEMPOMIG 32MM ROLLER COMPLETE WITH NYLON GEAR TYPE SIZE PART No.
30 WIRE FEED MOTORS & GEARBOXES Wire feed motor gearbox replacements to fit most wire feed systems, all have standard 10mm OD shaft with keyway & 4mm thread, & are mounted with three M6 screws.
31 UNIVERSAL EURO ADAPTORS & FITTINGS ITEM DESCRIPTION PART No MACHINE EURO KIT BLOCK, STEM, GUIDE AND ROUND FLANGE STANDARD UNIVERSAL MIG TORCH CONNECTION COMPLETE WITH ALL PARTS. ETC. LENGTH OF BRASS STEM: 90MM.
32 FANS AND FAN MOTORS Industrial standard panel fans - used by all manufacturers.
33 VOLTAGE SWITCHES MIG VOLTAGE SWITCHES - SINGLE PHASE (1 POLE) DESCRIPTION 2 POSITION 16/20 AMPS MAX 2 POSITION 32/40 AMPS MAX. 4 POSITION 32/40 AMPS MAX. 6 POSITION 20 AMPS SPECIAL SW.
34 CONTACTORS, GAS SOLENOIDS & RELAYS CONTACTORS HIGH QUALITY MANUFACTURED TO IEC947-4-1, 947-5-1, UL APPROVED, CE MARKED. KW RATING 4KW 9KW 11KW 11KW 15KW 22KW 22KW 25KW 45KW AC1 RATING 20A 32A 40A 40A 52A 60A 60A 80A 110A AC3 RATING 9A 16A 25A 25A 32A 40A 40A 50A 80A APPROX SIZE L W H 3 N.O. + 1 N.C. AUX 70mm x 45mm x 80mm 3 N.O. + 1 N.C. AUX 70mm x 45mm x 80mm 3 N.O. + 1 N.C. AUX 80mm x 55mm x 93mm 4 N.O.(special 4 pole version)80mm x 55mm x 93mm 3 N.O. + 1 N.C. AUX 80mm x 55mm x 93mm 3 N.O. + 1 N.
35 GAS / WATER FITTINGS & ACCESSORIES. 1/8 BSP - 6MM GAS TAILS – Fits our standard gas solenoids and is suitable for 6mm hoses. PART No: GAS1860 1/8 BSP - 8MM GAS TAILS - Fits our standard gas solenoids and is suitable for 8mm hoses. PART No: GAS1880 ¼ BSP - 8MM GAS TAILS – suitable for 8 mm hoses. PART No: GAS1480 3/8 BSP - 8MM GAS TAILS – suitable for 8 mm hoses. PART No: GAS3880 1/8 MALE – 1/4 FEMALE BSP COUPLER Can be used to convert solenoids to ¼ BSP fitting PART No: GAS1814 3/8 – R.H.
36 WATERPUMPS & FITTINGS. Top quality long life rotary water pumps as used by many of the leading manufacturers & fitted to our water coolers The pump head and impeller is made from brass & the shaft is stainless steel, the head can be rotated by 90 degree increments so the in & out port position can be changed to suit the machine, the ports are 8mm but 6mm hose is a good tight fit. We supply this pump with a capacitor and wiring information. WATER PUMP 110 VOLT AC WATER PUMP COMPLETE. AC SUPPLY 2.
37 RECTIFIERS & SEMI-CONDUCTORS REPLACEMENT SINGLE PHASE MIG RECTIFIERS DESCRIPTION 130A FULL WAVE BRIDGE 170A FULL WAVE BRIDGE 230A FULL WAVE BRIDGE 290A FULL WAVE BRIDGE 400A FULL WAVE BRIDGE 200A CENTRE TAP 280A CENTRE TAP 390A CENTRE TAP Plate sizes 140mm x 100mm 140mm X 100mm 200mm x 100mm 200mm x 100mm 200mm x 100mm 200mm x 100mm 200mm x 100mm 200mm x 100mm No.
38 PCB REPLACEMENTS ITEM UNIVERSAL MIG PCB FOR SINGLE PHASE M/C’S (230V) DESCRIPTION LOW COST BASIC PCB WITH ON BOARD AUX TRANSFORMER. FUNCTIONS INC: W. speed, in built burnback, + relay contact to drive a 230v~ contactor and solenoid, or directly switch mains into main transformer (up to 170A m/c’s). (No aux transformer required) (wire feed motor should be 24v, 60W max) Supply for motor is obtained from secondary of main transformer. (14 - 38VAC) Size L=95mm W=75mm H=50mm PCB23024 PART No. LOW COST W.
39 CONNECTORS EXTENDED RANGE DESCRIPTION APPLICATION PART No 2 WAY CABLE PLUG (12S – 3) 2 WAY PANEL SOCKET (12S – 3) MUREX, ESAB, ETC. MUREX, ESAB, ETC.
40 CONNECTORS OTHER CONNECTORS – to suit various makes and models of welding machines DESCRIPTION APPLICATION 2 PIN CABLE SOCKET 4 PIN CABLE SOCKET 3 PIN XLR CABLE PLUG 3 PIN XLR CABLE SOCKET 3 PIN XLR PANEL PLUG 3 PIN XLR PANEL SOCKET 4 PIN XLR CABLE SOCKET 4 PIN XLR PANEL PLUG 5 PIN XLR CABLE PLUG 5 PIN XLR PANEL SOCKET 2 PIN CONNECTOR 3 PIN CONNECTOR 2 PIN HUBBELL PLUG 3 PIN HUBBELL PLUG 3 PIN HUBBELL PLUG 3 PIN STRAIGHT PIN PLUG (C/W 2MTR LEAD) 3 PIN 110V AUX.
41 INTERCONNECTION LEADS - MIG (SHEATHED) A range of interconnection leads in various sizes and lengths, and covered with a sheathing. All come with 1/4” reinforced gas hose fitted with 3/8” nut and tail either end, welding cable with dinse type plug and socket fitted on ends, and either 3 core, 4 core, 7 core, 12 core or 18 core control cable (with no plugs fitted as standard). Water pipes are approx 1M longer at both ends & have no fittings as standard.
42 MULTI CORE CABLE – CABLES, SHEATHING & HOSE (HIGH QUALITY RUBBER MAINS CABLES & PVC CONTROL CABLE ETC CUT TO LENGTH) CABLE TYPE SUGGESTED USE PART No INTER-CONNECTORS / TORCH TRIGGER WIRES INTER-CONNECTORS INTER-CONNECTORS INTER-CONNECTORS INTER-CONNECTORS INTER-CONNECTORS INTER-CONNECTORS NTER-CONNECTORS INTER-CONNECTORS CAB201 CAB301 CAB315 CAB415 CAB701 CAB715 CAB815 CAB1215 CAB1801 MAINS CABLE 1~ PHASE MIGS UPTO 180A MAINS CABLE 1~ PHASE MIGS UPTO 230A, MAINS CABLE 1~ PHASE MIGS UPTO 300A, MAI
43 TRANSFORMER & CHOKE REPLACEMENTS AUXILIARY TRANSFORMERS PRIMARY VOLTAGES 0 – 110 - 230 0 - 230 0 - 230 - 400 0 - 230 - 400 0 - 230 - 400 0 - 24 - 42 - 110 / 0 - 12 0 - 220 - 240 0 - 220 - 240 0 – 25 - 245 - 405 0 - 230 - 400 0 - 230 - 400 0 - 24 – 45 / 0 - 110 0 - 230 - 400 0 - 230 - 400 0 - 230 - 400 0 - 230 - 400 0 - 230 - 400 0 - 240 - 415 0 - 220 / 0 – 220 0 - 240 - 415 0 - 230 - 400 0 - 230 - 400 0 - 220 - 400 0 - 240 - 415 0 - 240 - 415 0 - 240 - 415 0 – 230 - 400 0 - 230 - 400 0 – 230 – 400 0 –
44 METERS, SHUNTS & CALIBRATION SERVICES INDUSTRIAL ANALOGUE PANEL METERS AMPS / VOLTS READING 0 - 60 VOLT DC 0 - 100 VOLT DC 0 - 300 AMP DC 0 - 400 AMP DC 0 - 500 AMP DC 0 - 600 AMP DC 0 - 1000 AMP DC 0 - 1500 AMP DC NEW SHUNT VOLTS N/A N/A 60mV 60mV 60mV 60mV 60mV 60mV 0 – 400 AMP AC 400A AC CURRENT TRAN DIN 72 (72mm square - 68mm x 68mm cut out) - (MOVING COIL) PART No.
45 MISCELLANEOUS SPARES CAPACITORS OUTPUT SMOOTHING CAP 10000 uF 40V. FOR USE IN SINGLE PHASE MIGS HIGH RIPPLE CURRENT RATING. Approx 110MM X 35MM CAP1000040 OUTPUT SMOOTHING CAP 15000 uF 50V. FOR USE IN SINGLE PHASE MIGS CAP1500063 OUTPUT SMOOTHING CAP 22000 uF 50/63V. FOR USE IN SINGLE PHASE MIGS CAP2200063 OUTPUT SMOOTHING CAP 47000 uF 50V. FOR USE IN SINGLE PHASE MIGS CAP4700050 POWER FACTOR CORRECTION + MOTOR RUN CAPACITORS. HIGH RIPPLE CURRENT RATING.
46 TECHNICAL SERVICES INVERTER REPAIRS We offer a repair service for most inverters. Due to the complexity of most inverters, we often require the full machine to repair any of the circuit boards inside. A quote for the repair will be given before any work is carried out. If the customer does not want the machine repairing there is a small charge (small MMA & TIG & PLASMA inverters) to cover estimate time and carriage costs. This increases for complex or large machines.
47 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. A.A. WELDING STERLING SAFE T WELD PCB AA115 ECCONOFEED B PCB No: AA112 ECCONOFEED PCB NO: 21.6 (EARLY PCB) ECCONOFEED PCB NO: MK 3.
48 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. BUTTERS / BRITWELD OTTER M/M180 PROFFIMIG PCB (S1000A03 / MS10-1D) 602 CONTROL MOD 824 MOD 835 MODULE 838 CONTROL MODULE (MK30 BOX) 902 CONTROL MODULE LUNCHBOX TYPE W.F.U. PCB MK2 / MK3 W.F.U. PCB (PCB ONLY) MK3 CONTROL BOX COMPLETE NBC MIG CONTROL BOX PCB No:2001B BR 800 W.F.U. PCB No: P0800 MICROMIG PCB No: 81C P800 MK4 PCB AUTOWELD 165 ETC - 20 PIN AW303 PCB No: ELO840 ISS.
49 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. CEBORA POWER PLASMA 3000 HF PCB No: 5602074/B ABOVE PCB BUT WITHHV TRANSFORMER REWOUND PLASMA CONTROL PCB No: TESAX 804B SPOT WELDER CONTROL PCB No: 112433 SPOT WELDER PCB No: TESAX837 140A PLASMA PCB TR4 W.F.U FRONT PANEL PCB No: FA013220 VARIOUS PCB’S SEE SUREWELD PCBCEB40 PCBCEB41 PCBCEB52 PCBCEB45 PCBCEB54 PCBCEA01 PCBCEA02 PLASMA HF PCB AF2 PLASMA CONTROL PCB PL7 PLASMA CONTROL PCB PL15 PLASMA CONTROL PCB PL23 MIG PCB No: CO2G W.F.
50 MAKE PCB REPAIRS AND SERVICE EXCHANGE MACHINE / PCB PART No. ESS UNIARC 5 PCB FE11-4 & FE11-5 PCB PS12-9 CONTROL BOX FE15-2 CONTROL PCB PLASMA 40 / 80 PCB No: PL1 PLASMA PCB No: PL2 - 1 PCBESS01 PCBESS02 PCBESS03 PCBESS04 PCBESS05 PCBESS06 ESSTTI SEE OERLIKON PCB REPAIR PRICES EUROFEED EUTECTIC EUROFEED PCB CASTOTIG 150 RELAY PCB No: 1441281 / 1270213 CASTOTIG SMALL RELAY PCB CASTOTIG CONTROL PCB RYTMARC CONTROL PCB No: 4.070149 REMOTE RA2 PCB No: CFR4PA (4070.
51 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. FRONIUS W.F. PCB MRT1 TR19 CONTROL BOX VARIO STAR 317 - MR 25 A PCB No: 4.055.293 VARIO STAR 304 - MR 12 PCB No: 4.055.121 GLT 450 / 650 FRONT PANEL PCB No: GLT STC 4.055.055 SUPERWAVES TIGS AC - DC TIG CONTROL PCB SUPERWAVES TIGS AC - DC TIG REGULATOR PCB A010A CONTROL PCB No: 4.070.200B DTG 200 PCB No: 4.070.160 RA2 REMOTE CFR4PA PCB No: 4070.
52 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. KEMPPI FU10 PCB FU20 / 30 / 3500 PCB No:4235090 F2S1 MODULE LISA - 7 / 7W / 7WP / 8W / 8WP PCB LISA - 12 + LISA 14JP W.F.U. (VARIOUS PCB’S) LISA - 15 / 15P / 15PL / 16 / 16P W.F.U. PCB No: SY-M4 LISA - 15 / 15P / 15PL / 16 / 16P W.F.U. PCB No: SPR-3-24P W.F.U AM21 / AM42 PCB W.F.U.
53 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. LINCOLN IDEALARC R3R 375 / 500 / 600 PCB CV300 PCB No: L8873-1 CV400 / CV500i PCB No.
54 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. MIG PARTS WF2 CONTROL PCB WF3 CONTROL PCB PCBMIP01 PCBMIP02 MILLER MIG CONTROL PCB No: WA105 MODULE 1 PCB No:057084023 MODULE 2 PCB No:REO83 235 COMPACT PCB No: RE158B COMPACT BLUE PCB No: PN057084 216 / WIRE FEED UNIT PCB No: OL.02 T212 W.F.U PCB No. RE182B 424 FEEDER - RE153B S22A W.F.U PCB 22A W.F.U. (KS20) PCB No: 186328 24A CONTROL PCB No. 192652 S54 W.F.U PCB 562 / 564 PCB ST44 W.F.U PCB No: 056.156.
55 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No.
56 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. OERLIKON FRO, ESSETI HELVI, WEMI T400E SLOPE PCB TDC201 / TDC355 HF PCB SDC 400E PCB No: ES260 (FRO) SDC 303 / 403 PCB No: 412911 (WEMI) T2500P DC TIG MAIN PCB (THY. CONTROL) T2500 DC TIG – TIG CONTROL AND HF PCB T2000 / T2800 AC/DC TIG – TIG CONTROL AND HF PCB T2000 AC/DC TIG MAIN PCB (THY. CONTROL) T2800 AC/DC TIG MAIN PCB (THY. CONTROL) T2000 / T2500P / T2800P AMPS DISPLAY PCB TAC 173 PCB TAC 203 LOGIC PCB No: ES174 TAC 203 THY.
57 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. SAF SAFYARD 500 W.F.U. MOTOR CONTROL PCB No: 88140264G SAFYARD 500 THYRISTOR CONTROL PCB BURNBACK PCB No: 91604849 COMPACT MIG 321C PCB MONOMIG CONTROL PCB No: 9160 4034 RVC 42 MOTOR PCB 475TR MIG CHOPPER CONTROL PCB No: 9114 3829B / 8814 0129 MIG 455 PCB (VARIOUS) MAJOR 400 / 400S / 500 / 500S PCB NERTINOX 150P TIG CONTROL PCB No. 03893719 NERTINOX 150P TIG THY. CONTROL PCB No.
58 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. TECHNICAL ARC 24 VOLT MIG PCB No: M10396RPR 42 VOLT MIG PCB No: M10396RPR 200 / 245 COMPACT MIG PCB (OLD STYLE) 181 / 211 / 251 291 COMPACT MIG PCB No: MIG0507RPR (NEW STYLE) INDUSTRIALCOMPACT MIG RANGE PCB No: CMIG0307RPR LOW COST W.F.U. PCB F40 INLINE W.F.U. PCB (VERSION 1) F40 INLINE W.F.U PCB (VERSION 2) PCB No: MIG0205LES DUAL DISPLAY METER PCB No: DPM1296RPR SINGLE DISPLAY METER PCB No: TA DPM0699RPR 450E / 550E / 700E CC/CV THY.
59 PCB REPAIRS AND SERVICE EXCHANGE MAKE MACHINE / PCB PART No. LTEC / U CARBIDE AC / DC 250 HF LOGIC CONTROL PCB No: 675421 AC / DC 250 HF SOFT START AND ARC FORCE PCB No: 675492 LANZE C - 250 FRONT PCB BOTH PCB’S LANZE C - 250 CONTROL (RELAY PCB) REQUIRED LANZE C - 120 REG. PCB LANZE C - 120 LOGIC PCB PCBLTE20 PCBLTE22 PCBLTE14 PCBLTE15 PCBLTE16 PCBLTE17 WASA W.F.
TERMS, CONDITIONS & IMPORTANT INFORMATION NOTE. Reference to original manufactures names, model names and numbers is for convenience only. We not affiliated with any of the manufacturers listed in this catalogue. All parts supplied are not of original equipment manufacturers origin, but are a cost effective replacement. All manufacturers names listed are registered trademarks and are the property of the respective manufactures, and our reference to them is for your information only.
