Service manual

7 – 12
5) Remove the four screws. Remove the PCB4.
7.3.5 PCB5 (WK-5448) V
1) Remove the Side Panel. [See section "11.1-1"]
2) Remove the PCB4. [See section “12.3-4”]
3) Remove the three latches of Front Control Cover and then remove the PCB5.
 When reinstalling the PCB5, engage two latches of Front Control Cover first.
1
1
1
1
2
1
1
2
1
2
TRANSTIG 200 Pi
MAINTENANCE
SERVICE MANUAL