Service manual

7 – 5
7.3 Replacement Procedure
7.3.1 PCB1 (WK-5713) and Primary Diode D1 UVX[\
1) Remove the Side Panel. [See section “6.1-1”]
2) Remove the L102. [See section “
7.3-18”]
3) Remove the screw and three cables. Cut the snap band.
4) Remove the terminal and Disconnect the three connectors CN1 (PCB4), CN101, 103 (PCB1).
5) Remove the terminal.
3
3
1
2
CN103
CN101
CN1
1
SERVICE MANUAL
MAINTENANCE
TRANSTIG 200 Pi