User guide

20830-01 Rev 03
Page 4-2
4.2 Inventory of Parts
Table 1 lists the parts contained in the shipping containers.
Description
Passive Sonar Monitoring System
Sensor Head Cable
Installation Hardware
Sealant, Joint and Thread, PTFE Paste, 3.5 oz Tube – included with
fiberglass sensor cover assemblies with bolted flanges; Joining
Compound, High Viscosity, Non-Setting, Blue Paste for use with
stainless steel covers
Gauge, Spring Gap (used for sensor installation) - included with sensor
band assembly
System Installation & Startup Manual (Zone 2 systems also includes
supplemental manual Sonar Process Monitoring System Supplement
For ATEX Zone 2 Safety)
Kit, Parts, Pole Mounting (Option)
Sensor Rain Guard Kit (Option for covers with bolted flanges)
Thermal Barrier on select models
2 inch hose and mounting hardware (TAM-100)
Table 1 Passive Sonar Meter Parts List
4.3 Class I, Division 2 Label
Transmitters and sensor covers rated for use in Class I, Division 2
areas have labels that explicitly identify them as suitable for “Class I,
Division 2, Groups A, B, C, and D”. The Transmitters labels will also
include a UL listing mark.
WARNING
Use of non- Class I, Division 2 rated equipment in Class I,
Division 2 areas may result in a fire or explosion.
Note that in many North American jurisdictions equipment marked for
Division 2 can be installed in Zone 2 locations. Consult the National
Electric Code (ANSI/NFPA 70 Article 501) or the Canadian Electric
Code for guidance on suitability of Class I, Division 2-marked
equipment for North American Class I, Zone 2 installations.
4.4 European Zone 2 Rated Equipment
Transmitters and sensor covers rated for use in ATEX Class I, Zone 2
areas have labels that include the ATEX marking codes and a
DEMKO certificate number.
The SONAR PROCESS MONITORING SYSTEM SUPPLEMENT
FOR ATEX ZONE 2 SAFETY provides additional information for
ATEX Class I, Zone 2 installations.