Owner's manual

20909-01C Rev 04 Page 6-3

The following signals are not energy-limited for any of the transmitter models.

Note: These signals are not present on every model. Also, some models may

have one-piece screw terminal blocks and others may have two-piece pluggable

terminal blocks with either screw or spring clip terminals. These terminals will

accept 0.325 to 1.31 mm

(22-16 AWG) conductor sizes.

FIELDBUS

CONNECTOR

OUTPUT IS LIMITED TO LIMIT INPUT TO

A (Polarity is self-

correcting)

Isolated and bus powered +30VDC, 100mA from bus

B (Polarity is self-

correcting)

Isolated and bus powered +30VDC, 100mA from bus

Table 4 Fieldbus Connections