User's Manual

E272 - 2.4GHz Cordless
24 USING THE E272
NEED TO KNOW
If there is no voice announce message previously saved,
see “Creating a Directory Record” on page 22.
b. Press 2 to edit the voice announce message. The
following is displayed and announced.
BEGIN RECORDING
AFTER THE TONE
c. Hold the handset in the normal “talk” position. You
have 2 seconds to record the message you will hear
when the caller is announced. At the end of the 2
seconds, the recorded name message is
automatically saved and played back. The following
additional options are available again.
1=PLAY RECORDING
2=RECORD AGAIN
3=ERASE&EXIT
4=EXIT
d. If the new message is acceptable, press 4 to exit.
COPYING A CALLER ID RECORD
a. Press the CALLS () key.
b. Use the  REVIEW  key to find the call record
desired.
c. Use the 7•10•11 key to change between the
different formats and choose the correct
format for dialing from your area. It is
important to select the correct format
before
saving the number to the Directory.
NEED TO KNOW
To edit the name and number field, you must be in
Directory mode. For details see “Editing a Directory
Record” on page 23.
d. Press SAVE.
SAVED is displayed.
e. The following is displayed.
RECORD VOICE
ANNOUNCE MESSAGE
1=YES 2=NO
f. Press 1. The following is displayed and announced.
BEGIN RECORDING
AFTER THE TONE
g. Hold the handset in the normal “talk” position. You
have 2 seconds to record the message you will hear
when the caller is announced. At the end of the 2
seconds, the recorded name message is
automatically saved and played back. The following
additional options are available.
1=PLAY RECORDING
2=RECORD AGAIN
3=ERASE&EXIT
4=EXIT
h. If the new message is acceptable, press 4 to exit.