User's Manual

E272 - 2.4GHz Cordless
USING THE E272 21
DIALING FROM A CALLER ID RECORD
a. Press the CALLS () key or either the  or
 REVIEW key on the base.
b. Use the  REVIEW  key to find the call record
desired.
c. One Time Dialing (OTD) using the 7•10•11 key
(handset) or FLASH key (base) allows you to select
the correct format for dialing that number from your
area. Press the 7•10•11 key or FLASH key until the
correct format is displayed.
d. Press TALK / END or SPEAKER (handset or
base) to place the call.
e. Once the number has been dialed using this
method, all numbers from that area code are
displayed in Caller ID with the chosen format.
SAVING CALLER ID RECORDS
See “Copying a Caller ID Record” on page 24.
DELETING AN INDIVIDUAL RECORD
a. Press the CALLS () key or either the  or 
REVIEW key on the base.
b. Use the  REVIEW  key to find the call record you
want to delete.
c. Press DELETE.
DELETED appears.
DELETING ALL CALL RECORDS
a. Press CALLS (). or either the  or 
REVIEW key on the base.
b. Press and hold DELETE. The following is displayed:
DELETE ALL?
1=YES 2=NO
c. Press 1 to delete all or press the DELETE key again.
d.
DELETED is displayed.
e.
NO CALLS is displayed.
DIRECTORY RECORDS
The E272 personal phone directory will store up to 50
names and numbers. The E272 will also store 50 Voice
Announce messages with the names and numbers. In order
for a recorded message to be heard for an individual caller
on the E272, a recorded message must be saved with the
individual’s number in the directory. You can create your
directory in two ways: copy a Caller ID record to the
directory or create a new directory record. Once you create
your personal phone directory, you can automatically dial
from the directory.
DIRECTORY FULL is displayed when there are no memory
locations left. You need to delete an existing directory record
in order to save a new one.
7 digits 555-1234
10 digits 408-555-1234
11 digits 1-408-555-1234