User's Manual

E272 - 2.4GHz Cordless
USING THE E272 17
USING HOLD
You can place a call on hold by pressing the HOLD key
(handset or base). The talk /end and speaker (base) lights
flash slowly while calls are on hold.
CALL HOLDING is
displayed on the base and handset.
There are three ways to take a call off hold:
■ Press TALK / END or SPEAKER (handset or base) to
resume the call.
■ Pick up the call on another extension.
■ The caller hangs up.
USING MUTE
You can block your side of the conversation when you are
using the phone by pressing the MUTE key. Mute is available
on both the handset and base.
HANDSET
■ Press the MUTE key to turn ON.
■ CALL MUTED is displayed on the handset.
■ Press the MUTE key or hang up to turn OFF.
BASE
■ Press the MUTE key to turn ON.
■ The mute light on the base flashes.
■ Press the MUTE key or hang up to turn OFF.
USING NETWORK SERVICES
Your E272 is programmed so you can easily use all of the
convenient network services you subscribe to through your
local telephone company. To use any of these features,
press MENU / EXIT. The arrow is next to
NETWORK SERVS.
Press SELECT (or press 1).
For a list of the features that are programmed into your
phone, please refer to your Quick Start insert.
a. Press the  REVIEW  key to scroll through
the features until the desired feature is
displayed.
b. Press the TALK / END or SPEAKER (handset) key to
activate the feature.
NEED TO KNOW
If you would like to have access to a feature that you do
not currently subscribe to, please contact your local
telephone company.
USING THE INTERCOM
The intercom feature allows you to conduct a conversation
between the base and the handset when the phone is in idle
mode or when you are on a call.
NEED TO KNOW
When using the intercom, the handset speakerphone
can’t
be used. The message “NOT AVAILABLE BASE
SPEAKER ON
” is displayed.