User's Manual

E272 - 2.4GHz Cordless
USING THE E272 15
USING THE E272
ANSWERING CALLS
You can answer a call three ways:
■ Press TALK / END (handset).
■ Press SPEAKER (handset or base).
■ Press FLASH (handset or base) to answer Call
Waiting calls.
DIALING
a. Press TALK / END (handset) or SPEAKER
(handset or base).
b. Use the keypad to dial the phone number.
PRE-DIALING
Pre-dialing allows you to enter the number and verify it
before placing the call.
a. Use the handset or base keypad to enter a
telephone number.
b. Check the number on the display. If the number is
wrong, press DELETE to delete the entry digit-by-digit.
c. When the correct number is displayed, press
TALK / END or SPEAKER (handset or base) to place
the call.
LAST NUMBER REDIAL
To automatically redial the last number dialed, press
REDIAL / P (handset) or REDIAL (base).
ADJUSTING THE VOLUME
HANDSET
a. Press TALK / END.
b. Press the  or  VOLUME key on the side of the
handset while the phone is in use to decrease or
increase the volume. There are four volume levels.
HANDSET RINGER
a. Press the  or  VOLUME key on the side of
the handset while the phone is not in use.
b. The handset will ring. Press the  or  VOLUME key
to decrease or increase the ringer volume until the
desired ring level is obtained. There are four
different levels of ring (off, low, medium and high).
NEED TO KNOW
If the handset ringer is set to “off”, voice announcements
will not be heard.
HANDSET SPEAKER
a. Press the handset SPEAKER key.
b. Press the  or  VOLUME key on the side of the
handset while the phone is in use to decrease or
increase the speaker/intercom volume. There are
four volume levels.