User's Manual

E272 - 2.4GHz Cordless
14 FEATURES AND CONTROLS
NEED TO KNOW
When the Show Options is set to “Yes”, CWID options
is on. When it is set to “No”, CWID options is off.
To turn Call Waiting ID options on/off, press
MENU / EXIT. Using the  REVIEW  key, scroll through the
options until the arrow is next to
CWID OPTIONS and press
SELECT (or press 8).
-CALL WAITING-
SHOW OPTIONS
1=YES 2=NO
CURRENTLY NO
Press the number for the desired option or press
MENU / EXIT to leave as is.
VOICE ANNOUNCE SETUP
The E272 can announce each caller’s name or number
aloud while displaying the information on the handset.
“Private caller” and “Unavailable caller” are programmed into
your phone. To announce an individual’s name, you must
record the name with the individual’s number in your
directory. See “Creating a Directory Record” on page 22
and “Copying a Caller ID Record” on page 24 for recording.
NEED TO KNOW
Caller ID is required from your local telephone company.
Please contact your local telephone company to
activate this service.
To configure voice announce, press MENU / EXIT. Using the
 REVIEW  key, scroll through the options until the arrow
is next to
VOICE ANNOUNCE and press SELECT (or press
9). The following options are available. Press the number for
the desired option.
-VOICE ANNOUNCE-
1=OFF
2=NAMES+NUMBERS
3=NAMES ONLY
- Option - - Display -
1=OFF
Turns Voice Announce Off. No
recorded messages or numbers heard
VOICE ANNOUNCE
OFF
2=NAMES+NUMBERS
All calls will be announced. If a
message is recorded, the message is
played instead of a number. If a
message is not recorded, the number
will be heard.
ALL CALLS WILL
BE ANNOUNCED
3=NAMES ONLY
Only recorded messages and the
following will be heard: “Private caller”,
“unavailable caller”, “long distance” and
“no caller ID”.
ONLY RECORDED
MESSAGES WILL BE
ANNOUNCED