User's Manual

E272 - 2.4GHz Cordless
INSTALLING THE E272 3
SPARE BATTERY (OPTIONAL)
When the spare battery is fully charged for 24 hours in the
base, it provides operational backup during a power failure
(the handset will continue to operate).
a. Place the spare battery pack in the charger by
pressing the battery door release and removing the
cover.
b. Align the battery pack “+” and “-” signs with the “+”
and “-” in the battery compartment and press into
place.
c. Replace the cover and verify the spare charge LED
is lit.
NEED TO KNOW
Install the spare battery after plugging in the adapter.
DESKTOP / WALL MOUNT WEDGE
The E272 can be set on a tabletop or mounted on the wall.
DESKTOP OR TABLETOP
Your E272 comes ready to be placed on a desktop.
WALL MOUNTING
To mount your E272 on the wall, the mounting wedge must
be removed and reattached.
REMOVING THE MOUNTING
W
EDGE BRACKET
Remove the mounting wedge from
the bottom of the base by placing
your thumbs near the arrow on the
mounting wedge and pressing in
the direction of the arrow.
Desktop Orientation Wall Mount Orientation
Spare Battery
Battery Door
Charger
Release
CAUTION:
To reduce risk of
fire, replace only
with the same
type battery
listed in the
User Manual.
!